Ebyte ECK20-6Y28C Series Core Board Product Information

The Ebyte ECK20-6Y28C series core board is an embedded core board meticulously designed based on the NXP Cortex-A7 core i.MX6ULL processor. It adopts a BTB connector, featuring low cost, low power consumption, high cost-effectiveness, and high reliability, and can be widely applied in industrial control, HMI, IoT, and other fields.

The NXP i.MX6ULL processor employs a single ARM Cortex-A7 core with a maximum frequency of up to 792MHz. It provides abundant I/O resources such as 1-channel LCD display, 1-channel digital camera, 2-channel 100M Ethernet, 2-channel USB OTG, 8-channel UART, 2-channel SDIO, 2-channel CAN, and multiple GPIOs.

The ECK20-6Y28C series core board includes 3 specific product models, which mainly differ in memory capacity, storage configuration, etc. Customers can select the appropriate model according to their needs.

Key Features

  1. Processor: i.MX6ULL series industrial-grade processor with a frequency of 792MHz;

  2. Memory: On-board DDR3L SDRAM with optional capacities of 256MB/512MB;

  3. Storage: Optional 8GB eMMC or 512MB parallel NAND FLASH;

  4. Display: 1-channel parallel display interface, supporting a maximum resolution of WXGA (1366×768@60fps);

  5. Network: 10/100 adaptive Ethernet MII/RMII interface;

  6. USB: 2-channel USB2.0 OTG interface;

  7. SDIO: 2-channel MMC/SD/SDIO card interface (only 1-channel SDIO can be led out in eMMC configuration);

  8. Multiple extended I/O interfaces: Including UART, CAN, I2C, SPI, SAI, ADC, GPIO, etc.;

  9. Supports on-chip watchdog function (timeout can cause processor reset);

  10. Supports on-chip RTC function;

  11. Interface form: 120-pin BTB connector;

  12. Power supply: Single-channel DC +5V±10%@0.3A power input;

  13. Structural size: 46×36×6.8mm, where the height of PCB + shield is 3mm, and the combined height of BTB connector is 5mm.

Typical Applications

  • Smart home;

  • Smart toys;

  • Smart city;

  • Tablet computers;

  • IoT gateways;

  • Advertising all-in-one machines;

  • Industrial all-in-one machines;

  • Industrial control motherboards;

  • Robots and drones.

Model Configuration

The selection and configuration table of ECK20-6Y28C series core boards is as follows: