[Introduction]:E73-2G4M08S1E is a small-sized, low-power multi-protocol module developed by Ebyte. It adopts the original imported nRF52833 radio frequency chip from Nordic, supports Bluetooth 5.1, Ble mesh, Thread, Zigbee; This chip comes with a high-performance ARM CORTEX-M4 core.
[IC]:nRF52833
[Frequency]:2.360~2.500GHz
[Protocol]:BLE5.1/Zigbee
[Distance]:120m
[Size]:13.0*18.0mm
[Weight]:1.0±0.1g
Main Parameters | Min. | Max. | Remarks |
---|---|---|---|
Power supply(V) | 0 | 5.5 | Voltage over 5.5V will cause permanent damage to module |
Blocking power(dBm) | - | 10 | Chances of burn is slim when modules are used in short distance |
Operating temperature(℃) | -40 | +105 | Industrial grade |
Main Parameters | Min. | Typ. | Max. | Remarks |
---|---|---|---|---|
Operating voltage(V) | 1.7 | 3.3 | 5.5 | ≥3.3V ensures output power |
Communication level(V) | - | 3.3 | - | For 5V TTL, it may be at risk of burning down |
Operating temperature(℃) | -40 | - | +85 | Industrial design |
Operating frequency(MHz) | 2360 | - | 2500 | Support ISM band |
Transmitting current(mA) | - | 17.5 12.9 8 |
- | TX only run current(DC/DC, 3V) P(RF)= +8 dBm TX only run current(DC/DC, 3V) P(RF)= +4 dBm TX only run current(DC/DC, 3V) P(RF)= +0 dBm |
Receiving current(mA) | - | 7.8 8.4 |
- | RX only run current (DC/DC, 3V) 1M bps / 1M bps BLE RX only run current (DC/DC, 3V) 2M bps / 2M bps BLE |
Transmitting power(dBm) | 7 | 7.5 | 8 | - |
Receiving sensitivity(dBm) | - | -103dBm @ BLE 125kbps -96dBm @ BLE 1Mbps |
- | long distance mode - |
Main parameter | Description | Remarks |
---|---|---|
Reference distance | 120m | Clear and open environment, height 2.5 meters, air rate 1M bps |
Crystal Oscillator | 32MHz | - |
Protocol | BLE 5.1/Ble mesh/Thread/Zigbee | - |
Package | SMD | - |
Interface | 1.27mm | Stamp hole |
IC | nRF52833-QIAA/aQFN ™ 73 | - |
FLASH | 512kB | - |
RAM | 128kB | - |
Core | ARM®Cortex®-M4 | - |
Size | 13*18mm | - |
Weight | 1±0.1g | - |
Antenna | Ceramic antenna | 50 ohm impedance |