Lightweight Antenna

Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.

1. Lightweight IoT Antenna Series - Sub-Product Line Filter

Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.

Sub-Series Code	Antenna Type	Form Factor & Material	Installation / Interface	Best Application Scenarios
FPC	Flexible Printed Circuit	Ultra-thin, bendable, lightweight tape	IPEX-1 / IPEX-3 / IPX	Internal mounting on curved surfaces, compact smart home devices.
PCB	Printed Circuit Board	Rigid board, compact size	IPEX / SMA-J	Internal flat mounting, routers, gateways requiring stable structural gain.
TH	Spring Antenna	Coiled copper spring, highly compact	PCB Solder (Through-hole)	Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks).
JK / JKD	Rubber / Foldable Antenna	TPEE material, straight or 90-degree foldable	SMA-J (Male thread, inner pin)	External cabinet mounting, modems, adaptable signal orientation.
JZ / JZG	Glue Stick / Rubber Rod	Straight, sturdy cylinder shape	SMA-J	Standard external communication modules, durable outdoor/industrial use.
JW	Elbow Rubber Antenna	Fixed 90-degree right angle	SMA-J	Wall-mounted terminals where straight antennas take up too much vertical space.
JZLW	Screw Fixed Rubber Rod	High gain, screw-fixed base	IPEX-1 to external rod	Equipment cabinets, logistic fleets, property security bases.

2. Model Selection by Parameters (Frequency & Form Factor)

Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.

Frequency Band	Recommended FPC/PCB (Internal)	Recommended Rubber (External)	Recommended Spring (Solder)
170MHz / 230MHz (VHF)	-	TX170-JKD-20, TX230-JK-11	-
433MHz (UHF, LoRa)	TX433-FPC-5711, TX433-PCB-3207	TX433-JZ-5, TX433-JKD-20, TX433-JW-5	TX433-TH-3, SW433-TH32DN
868MHz / 915MHz (LoRaWAN)	TX915-FPC-4510	TX868-JZ-5, TX915-JK-11, TX868-JZLW-15	-
2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee)	TX2400-FPC-2509, TX2400-PCB-4811	TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3	-
LTE / GSM / NB-IoT (Cellular)	TX4G-FPC-4015, TX4G-PCB-125014	TXGN-JKD-20, TXGN-JW-5	-

3. Quick Selection Guide

Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.

4. Frequently Asked Questions (FAQ)

Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?

A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.

Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?

A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.

Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?

A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.

Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?

A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.

EBYTE TX868-JZ-5 vertical high gain 868MHz antena for wireless communication and others

$0.82

Ebyte's antena 3 0 has an expansive variety of antennas that excel in a myriad of applications. It's the perfect choice for those seeking a relatively small and reliable antenna...

Vue expressVue express Ajouter au panierAjouter au panier

TX868-JKD-20 vertical high gain 868MHz rubber antena 3 portugal 3.0

$1.69

Ebyte's Antenna has the industry’s broadest selection of antennas for a wide variety of applications. They work well for common applications that need good performance as well as a relatively...

Vue expressVue express Ajouter au panierAjouter au panier

Ebyte 2.4GHz UHF VHF 2.4GHz RF Omnidirectional antenas wifi 3.0 precios TX2400-JKD-20

$1.42

TX2400-JKD-20 is a 2.4GHz bendable rubber antenna. and the antenas wifi 3.0 precios 1.07$. Height of the antenna is 200mm. With a SMA-J connector (SMA inner screw thread and inner...

Vue expressVue express Ajouter au panierAjouter au panier

TX433-JKD-20 433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna

$0.99

433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna [Gain]：3.0dBi [Interface]：SMA-J [Standing wave (SWR)]： ≤1.5 [Frequency]： 400~470MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：21±1g [Introduction]：TX433-JKD-20 is a 433MHz bendable rubber antenna....

Vue expressVue express Ajouter au panierAjouter au panier

Ebyte TX2400-JK-11 high gain antenna 3dBi 2.4GHz SMA-J rf radio Omnidirectional Antenna

$1.39

[Frequency]：2.4G [Interface]：SMA-J [Resistance]：50Ω [Gain]：3dBi [Standing wave (SWR)]：≤1.5 [Introduction]：Rubber antenna

Vue expressVue express Ajouter au panierAjouter au panier

433MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 2.5dBi Gain High-quality Omnidirectional Antenna TX433-JZG-6

$1.08

2.5dBi RF Omni directional Straight Antenna for wireless communication and others [Gain]：2.5dBi [Interface]：SMA-J [Standing wave (SWR)]： ≤1.5 [Frequency]：433MHz [Resistance]：50Ω [Feature]：Straight Antenna [Introduction]：Ebyte's Antenna has the industry’s broadest selection of antennas for...

Vue expressVue express Ajouter au panierAjouter au panier

TX915-JK-11B New Ebyte 2.5dBi high gain 915MHz Ism band SMA-J rf antenna

$0.99

TX915-JK-11B is an industrial-grade 915MHz ISM band rubber antenna featuring a 2.5dBi gain and a low SWR ≤ 1.5, optimized for reliable long-range LoRa and RF communication with a standard...

Vue expressVue express Ajouter au panierAjouter au panier

EBYTE TX433-JZ-5 high gain antenna 433MHz for module iot communication glue stick antenna 433mhz antenna

$0.68

2.0dBi high gain antenna 433MHz for module iot communication [Gain]：2.0dBi [Interface]：SMA-J [Standing wave (SWR)]：Less than 1.5 [Frequency]： 433MHz [Resistance]：50Ω [Feature]：Ultra -short straight antanna [Introduction]：Ebyte's Antenna has the industry’s broadest selection of...

Vue expressVue express Ajouter au panierAjouter au panier

2.4G 5.8G EBYTE Antenna Rubber Antenna SMA-J Interface 2dBi For Wireless TX2400-JW-3

$0.88 – $0.99

TX2400-JW-3 Rubber Antenna 2.4GHz 2dBi SMA-J Omnidirectional Radiation Vertical Polarization 20W External Wireless Module [Frequency]：2.4-2.5GHz [Interface]：SMA-J [Resistance]：50Ω [Gain]：3.5dBi [Standing wave (SWR)]：≤1.5 [Feature]：Rubber antenna [Introduction]：Rubber antenna TX2400-JZ-5 vertical high gain antenna...

Vue expressVue express Achat expressAchat express

Ebyte TX230-JK-11 230MHz SMA-J Interface 50Ohm Impedance Less Than 1.5 SWR 2.5dBi Gain High-quality Omnidirectional Antenna

$1.48

230M Wireless Rf Module Communication Antenna 110mm 2.5dBi Flexible Aerial 230MHz Omni Rubber Antenna [Frequency]：230MHz [Interface]：SMA-J [Resistance]：50Ω [Gain]：2.5dBi [Standing wave (SWR)]：≤1.5 [Introduction]：230MHz dedicated antenna, after professional testing by our company,...

Vue expressVue express Ajouter au panierAjouter au panier

GPS Antenna BDS Double-star Position SMA-J Rubber Antenna For RF Module High Gain 7dBi Impedance 50Ω CDEBYTE TXGB-JKD-20

$1.89

Ebyte Rubber rod antenna with GPS and BD for all kinds of GPS band wireless equipment [bandwidth]：GPS/Galileo/Glonassc [Interface]：SMA-J [Resistance]：50Ω [Gain]：7dBi [Standing wave (SWR)]：≤ 2 [Weight]：21g [Feature]：rubber antenna [Introduction]：TXGB-JKD-20 is a...

Vue expressVue express Ajouter au panierAjouter au panier

CDEBYTE 490MHz 2.0dBi SMA-J Glue Rod Antenna Omni Omnidirectional Exterial Aerial TX490-JZ-5

$1.20

TX490-JZ-5 Rubber antenna 50mm 2.0 dBi 490mhz rubber antenna wireless module antenna for wireless communication and others [Frequency]：490M [Interface]：SMA-J [Resistance]：50Ω [Gain]：2.0dBi [Standing wave (SWR)]：≤1.5 [Introduction]：The TX490-JZ-5 antenna has been tested...

Vue expressVue express Ajouter au panierAjouter au panier