Ebyte Lightweight IoT Antenna Series | FPC, PCB & Rubber Antennas – Tagged "4G/LTE" – Ebyte Official Store - IoT Module Manufacturer

Lightweight Antenna

Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.

1. Lightweight IoT Antenna Series - Sub-Product Line Filter

Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.

Sub-Series Code Antenna Type Form Factor & Material Installation / Interface Best Application Scenarios
FPC Flexible Printed Circuit Ultra-thin, bendable, lightweight tape IPEX-1 / IPEX-3 / IPX Internal mounting on curved surfaces, compact smart home devices.
PCB Printed Circuit Board Rigid board, compact size IPEX / SMA-J Internal flat mounting, routers, gateways requiring stable structural gain.
TH Spring Antenna Coiled copper spring, highly compact PCB Solder (Through-hole) Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks).
JK / JKD Rubber / Foldable Antenna TPEE material, straight or 90-degree foldable SMA-J (Male thread, inner pin) External cabinet mounting, modems, adaptable signal orientation.
JZ / JZG Glue Stick / Rubber Rod Straight, sturdy cylinder shape SMA-J Standard external communication modules, durable outdoor/industrial use.
JW Elbow Rubber Antenna Fixed 90-degree right angle SMA-J Wall-mounted terminals where straight antennas take up too much vertical space.
JZLW Screw Fixed Rubber Rod High gain, screw-fixed base IPEX-1 to external rod Equipment cabinets, logistic fleets, property security bases.

2. Model Selection by Parameters (Frequency & Form Factor)

Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.

Frequency Band Recommended FPC/PCB (Internal) Recommended Rubber (External) Recommended Spring (Solder)
170MHz / 230MHz (VHF) - TX170-JKD-20, TX230-JK-11 -
433MHz (UHF, LoRa) TX433-FPC-5711, TX433-PCB-3207 TX433-JZ-5, TX433-JKD-20, TX433-JW-5 TX433-TH-3, SW433-TH32DN
868MHz / 915MHz (LoRaWAN) TX915-FPC-4510 TX868-JZ-5, TX915-JK-11, TX868-JZLW-15 -
2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee) TX2400-FPC-2509, TX2400-PCB-4811 TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3 -
LTE / GSM / NB-IoT (Cellular) TX4G-FPC-4015, TX4G-PCB-125014 TXGN-JKD-20, TXGN-JW-5 -

3. Quick Selection Guide

  • Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
  • Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
  • Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
  • Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.

4. Frequently Asked Questions (FAQ)

Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?

A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.

Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?

A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.

Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?

A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.

Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?

A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.

Ebyte COJXU TX4G-FPC-6859 stable signal 6dBi IPEX-I interface 4g antenna high gain FPC built-in antenna

$0.99

TX4G-FPC-6859 4G/LTE frequency band FPC built-in antenna   [Type]:FPC built-in antenna [Frequency band]: 4G/LTE [Interface]: IPEX-Ⅰ generation interface [Impedance]:50Ω [Gain]:6dBi [Standing wave ratio]:≤1.5 [Weight]: 2g [Introduction]:TX4G-FPC-6859 is a 4G/LTE frequency band FPC built-in...

EBYTE TX4G-FPC-4015 2.5dBi IPEX-I interface FPC built-in antenna 4g fpc antenna

$0.66

TX4G-FPC-9914 4G/LTE frequency band FPC built-in antenna [Type]:FPC built-in antenna [Frequency band]:4G/LTE [Interface]: IPEX-Ⅰ generation interface [Impedance]:50Ω [Gain]:5dBi [Standing wave ratio]: ≤2.0 [Weight]:2g [Introduction]:TX4G-FPC-9914 is a 4G/LTE frequency band FPC built-in antenna...

EBYTE TX4G-FPC-8226 small volume 5dBi IPEX-I interface FPC built-in antenna 4g fpc antenna

$0.76

TX4G-FPC-8226 4G/LTE frequency band FPC built-in antenna [Type]:FPC built-in antenna [Frequency band]:4G/LTE [Interface]:IPEX-Ⅰ generation interface [Impedance]: 50Ω [Gain]:5dBi [Standing wave ratio]: ≤1.5 [Weight]:1g [Introduction]:TX4G-FPC-8226 is a 4G/LTE frequency band FPC built-in antenna...

FREE SHIPPING

Free shipping on orders over $89.99.

SUPPORT 24/7

Contact on weekdays: ebyteiot@cdebyte.com.

30 DAYS RETURN

Simply return it within 30 days for an exchange.

100% PAYMENT SECURE

We ensure secure payment.

Dimanche, Lundi, Mardi, Mercredi, Jeudi, Vendredi, Samedi
Janvier,Février,Mars,Avril,Mai,Juin,Juillet,Août,Septembre,Octobre,Novembre,Décembre
Articles en stock insuffisant. Plus que [max] en stock.
Ajouter à la liste d'enviesParcourir la liste d'enviesSupprimer la liste d'envies
Panier d'achat

Votre panier est vide.

Return To Shop

Ajouter un message à votre commandeEditer la note de votre commande
Calculer les frais de port
Ajouter un code de réduction

Calculer les frais de port

Ajouter un code de réduction

Le code de réduction fonctionnera au moment du paiement