Ebyte E32-900T20S-V8 SX1276 LoRa Wireless Module 100mW 868/915MHz Support Air-Wake up SMD Long Range Wireless Module Date Transceiver

Main parameters	Parameter value	Remark
reference distance	5.5kM	Sunny and open space, antenna gain 5dBi, antenna height 2.5 meters, air rate 2.4kbps
Subcontracting method	58Btye	Maximum capacity of a single package, automatically subcontracted when exceeded
cache capacity	512Btye	-
Modulation	LoRa™	-
Communication Interface	UART serial port	TTL level
Packaging method	patch	-
Interface mode	stamp hole	Pitch 1.27mm
Dimensions	26*16mm	-
Antenna interface	IPEX/stamp hole	Characteristic impedance is about 50Ω

Main parameters	Minimum value	Typical value	maximum value	unit	condition
Operating Voltage	2.3	5	5.5	V	>5.5V guaranteed output power
Communication level	-	3.3	-	V	-
Operating temperature	-40	-	85	℃	Industrial grade design
Working frequency	862	-	931	MHz	-
Emission current	-	120	-	mA	-
receive current	-	16	-	mA	-
Sleep current	-	4	-	μA	-
Maximum transmit power	-	20	-	dBm	-
Receive sensitivity	-	-123	-	dBm	2.4kbps over the air

Practical Application Scenarios

1. European Smart Water/Gas Meter Reading System with E870 LoRaWAN Gateway

Embed E32-900T20S-V8 inside residential smart meters, adopt WOR air wake-up mode to cut meter battery power consumption. The 5.5km long-distance LoRa signal penetrates multi-story building walls, upload pulse meter data to E870-S industrial gateway. Ultra-low 4uA deep sleep current extends lithium battery service life of passive meters over 5 years, FCC & CE certification meets EU utility meter export standards.

2. North American Large Farm Environmental Monitoring Matching EID041 Sensors

Pair this LoRa module with EID041 temperature humidity transmitters for distributed agricultural monitoring nodes. LoRa spread spectrum anti-interference capability eliminates signal loss from crop barriers and farm machinery electromagnetic noise. Wide 2.3-5.5V voltage supports solar small power supply for remote field sensor equipment, compact 26*16mm SMD size fits tiny sensor PCB layout.

3. Australia Outdoor Livestock Tracking Collar Terminal

Integrate E32-900T20S-V8 into animal ear tag collars, deep sleep mode reduces daily power drain. Long 915MHz transmission covers vast grazing land without cellular network coverage, stamp hole onboard antenna design removes extra antenna assembly cost for mass livestock IoT hardware OEM production.

4. Southeast Asian Factory Equipment Vibration Alarm Nodes

Connect E32-900T20S to vibration sensors and STM8 low-power MCUs, wirelessly send equipment fault alarm signals to factory central PLC. Multi transmission modes support point-to-point and group broadcast alarm push, industrial -40~85 Celsius temperature works stably in high-temperature metal workshop environments.

5. Global Battery-Powered Portable Industrial Data Loggers

Use the module as wireless data link for portable temperature/humidity loggers, transparent transmission mode simplifies upper computer data reading. Multiple antenna options (FPC / whip antenna) adapt handheld device structural design, built-in watchdog circuit prevents wireless communication crash caused by complex field electromagnetic interference.

FAQ Section

1. What is the difference between WOR air wake-up mode and deep sleep mode?

WOR mode keeps the receiver in low-power listening state and wakes up via wireless signal without MCU trigger, suitable for periodic data collection terminals. Deep sleep mode cuts RF and MCU power entirely with only 4uA static current, which cannot receive or transmit data and only works for long standby offline battery devices.

2. Can 5V single-chip IO pins directly connect the module’s UART port?

This LoRa module uses 3.3V TTL electrical level. Direct wiring with 5V MCU will burn internal RF chip permanently. Voltage divider resistors or level shifting circuits must be added between MCU and module serial pins.

3. What antenna matching is needed to reach the rated 5.5km communication distance?

To achieve standard 5500m line-of-sight range, users need to equip 5dBi high gain IPEX whip antenna. Onboard stamp hole micro antenna only supports short-distance indoor transmission below 800 meters.

4. Does Ebyte provide customized firmware service for E32-900T20S-V8?

Yes, OEM custom firmware development is supported. Engineers can adjust air rate, wake-up timing, transmission logic and add encryption algorithms according to customer industrial IoT project requirements, free sample verification before mass order.

5. Is this module compliant with EU and North American overseas market RF regulations?

E32-900T20S-V8 has passed official CE and FCC certification, complete test reports and certification documents can be provided for customs clearance and product market access application in EU, USA, Canada regions.