Produits

E62-433T20D 2km 4 Data Nrf24l01 Transmitter 8km 433mhz Receiver 24ghz Wireless Transceiver Rf Module   [Frequency]：425~450.5MHz [Power]：10~20dBm [Distance]：1.0km [Interface]：UART [Weight]：6.5±0.1g [Introduction]：E62 series are full duplex wireless transceiver modules (UART interface),operating...

[Introduction]：E73-2G4M08S1E is a small-sized, low-power multi-protocol module developed by Ebyte. It adopts the original imported nRF52833 radio frequency chip from Nordic, supports Bluetooth 5.1, Ble mesh, Thread, Zigbee; This chip...

E75 series designed by Chengdu Ebyte is a high-performance and low-consumption ZigBee wireless transceiver module, which is based on NXP JN5168. It provides a complete application integration scheme at ISM(2.4-2.5GHz)...

Ebyte Module test board for E78 series chip SOC module testing and development [Interface]：USB [IC]：ASR6505 [Size]：70*36mm [Introduction]：E78-400TBL-01A is a complete set of test products specially formed for E78 series chip...

E78-433LN22S(6601) ASR6601 solution, low power consumption, wireless transparent transmission, LoRaWan node module [Chip solution]：ASR6601 [Carrier frequency]：433.175~434.665MHZ [Transmission power]：22dBm [Communication distance]：5.6km [Product size]：20*14*2.8mm [Product weight]：1.6g±1g [Introduction]：The E78-433LN22S (6601) module is standard...

E810-DTU(1RS1E) Ethernet to RS232/RS485/RS422,single serial port server,support TCP Server, TCP Client, UDP Server, UDP Client four communication mechanisms. [Interface]：Ethernet to RS232/RS485/RS422 [Feature]：Transparent transmission [Size]：80×62×25mm [Product weight]：130±5g [Introduction]：E810-DTU (1RS1E) is a...

E810-DTU(CAN-ETH) CAN-BUS to Ethernet CAN-Bus DTU that integrates one CAN interface and one Ethernet interface [Interface signal]：CAN [Interface mode]：Ethernet [Product weight]：74g±1g [Features]：CAN-BUS to Ethernet [Introduction]：The E810-DTU (CAN-ETH) is a high-performance...

E810-DTU(RS) Ethernet to RS232/RS485/RS422 [Interface]：RS485/RS422 [IC]：RS232:DB9 [Size]：82×84×25mm [Power]：5~36dBm [Feature]：Transparent transmission [Product weight]：130±5g [Introduction]：E810-DTU (RS) is a high cost-effective RS232 to RS485/RS422 isolated interface bidirectional converter independently developed by Chengdu Ebyte...

[Introduction]：Data transmission Interface：USB to RS485 IC：CH340 Size：70*27*14mm Introduction：Data transmission   Company Profile Ebyte Company Profile Product Descriptio Manual  

E820-DTU(2I2-433L)-V8 RS485 analog signal transmission [Acquisition Type]： Analog [Acquisition range]： 4~20mA [Interface type]： RS485 [Number of acquisition channels]： 2 channels [Product weight]： 242±5g [Introduction]：E820-DTU(2I2-433L)-V8 is a remote-controlling device supporting analog quantity following, controlling, and collecting....

E860-DTU(2020-400SL)Switching value Terminal equipment for remote transmission 2 channels of acquisition switch input (DI) 2 channels of control relay output (DO) [Communication interface]：RS485 [Transmission distance]：10km [Working voltage]： DC 8～28V [Installation method]：guide...

E860-DTU(2020-400SL)A Switching Signal relay module wireless transmission remote control remote synchronous transmission acquisition feedback [Communication interface]：RS485 [Transmission distance]：10km [Working voltage]： AC 85～265V [Installation method]：guide rail installation [Product size]： 108*87.5*65mm [Product weight]：194g±5g [Introduction]：E860-DTU(2020-400SL)A...