[Chip solution]：AT6558R
[Communication interface]： RS485
[Operating voltage]：2.7-5.5V
[Positioning system]：BDS/GPS/GLONASS
[Product size]：50.4*38.4*17.0mm
| Main parameters | performance | Remark | ||
| minimum value | Typical value | maximum value | ||
| Working voltage (V) | 2.7 | 5.0 | 5.6 | Exceeding 5.5V may burn the module |
| Communication level (V) | 3.3 | Using 5V TTL risks burning out | ||
| Working temperature (℃) | -40 | - | 85 | Industrial grade design |
| humidity | 5% | - | -95%RH | No condensation |
| Main parameters | describe | Remark |
| Baud rate (bps) | 4800~115200 | Default 9600 |
| data bits | 8bit | - |
| Stop bit | 1 | - |
| Communication interface | RS485 | - |
| Product size | 50.2*38.4*17.0mm | ±0.2mm |
| Antenna interface | ceramic antenna | - |
| Communication protocol | Support NMEA0183 V4.10 and previous versions | - |
| Location update rate | 1Hz | The maximum positioning update frequency can reach 10Hz |
| Supported positioning systems | BDS/GPS/GLONASS | BDS B1、GPS L1、GLONASS L1 |
| Product weight | 65.2g | ±0.5g |
| category | Indicator items | Typical value | unit |
| Positioning time (test condition 1) | cold start | ≤32 | s |
| hot start | ≤1 | s | |
| recapture | ≤1 | s | |
| Sensitivity (test condition 2) | cold start | -148 | dBm |
| hot start | -156 | dBm | |
| recapture | -160 | dBm | |
| track | -162 | dBm | |
| Accuracy (test condition 3) | Horizontal positioning accuracy | <2.5 | m |
| Speed positioning accuracy | <0.1 | m/s | |
| Timing accuracy | 30 | ns | |
| Power consumption (test condition 4) | E108-GN03 capture current | 25 | mA |
| E108-GN03S capture current | 26 | ||
| E108-GN03D capture current |
24 |
||
| E108-GN03G-TTL capture current |
25 | ||
| E108-GN03G-485 capture current |
29 | ||
| E108-GN03G-232 capture current |
30 | ||
| E108-GN03 tracking current | 25 | mA | |
| E108-GN03S tracking current | 26 | ||
| E108-GN03D tracking current |
24 |
||
| E108-GN03G-TTL tracking current |
25 | ||
| E108-GN03G-485 tracking current |
29 | ||
| E108-GN03G-232 tracking current |
30 | ||
| E108-GN03 sleep current | 64 | uA | |
| E108-GN03S sleep current | 57 | ||
| E108-GN03D sleep current | 0.3 |
Note: The above results are for GPS/Beidou dual-mode working mode.
[Test condition 1]: The number of receiving satellites is greater than 6, the signal strength of all satellites is -130dBm, the average value is taken after 10 tests, and the positioning error is less than 10 meters.
[Test condition 2]: External LNA noise coefficient is 0.8, the number of receiving satellites is greater than 6, and the received signal strength value is locked within five minutes or without losing lock.
[Test Condition 3]: Open and unobstructed environment, 24 hours of continuous power-on test, 50% CEP.
[Test Condition 4]: The number of receiving satellites is greater than 6, and the signal strength of all satellites is -130dBm.
