E106 series are industrial SX1302 LoRa gateway RF modules with 27dBm transmit power, SPI Mini PCI-e interface, global 433/470/868/915 ISM bands, built-in PA&LNA, supporting 8-channel receiving and long-distance LoRaWAN gateway development, available as bare modules or matched antenna combo kits for worldwide industrial IoT, smart meter and environmental monitoring projects.
1. Core Product Parameter Comparison Table
| Model Number | Frequency Band | Transmit Power | Communication Interface | Chip Solution | Antenna Interface | Matched Antenna Included | Max Line-of-Sight Range | Application Scenarios |
|---|---|---|---|---|---|---|---|---|
| E106-433G27P2 | 433MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 Internal Socket | No (Module Only) | 8~10km | Smart Meter, Agricultural Monitoring, Factory Sensor Network |
| E106-470G27P2 | 470MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 Internal Socket | No (Module Only) | 8~10km | China Domestic Water/Gas Meter, Urban IoT |
| E106-868G27P2 | 868MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 Internal Socket | No (Module Only) | 6~8km | EU Industrial IoT, LoRaWAN Nodes, Smart City |
| E106-915G27P2 | 915MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 Internal Socket | No (Module Only) | 6~8km | North America Sensor, Agricultural Equipment |
| E106-433G27P2 + XC-IPX-SMA-15 | 433MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 to SMA Adapter Cable | SMA Transfer Cable | 8~10km | External Antenna Installation, Cabinet Equipment |
| E106-433G27P2 + TX433-JKS-IPX20 | 433MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 + 433MHz Rod Antenna | 433MHz Rubber Rod Antenna | 8~10km | Plug & Play Portable Devices, Remote Controller |
| E106-470G27P2 + XC-IPX-SMA-15 | 470MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 to SMA Adapter Cable | SMA Transfer Cable | 8~10km | Domestic Meter Reading Cabinet Integration |
| E106-470G27P2 + TX470-JKS-IPX20 | 470MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 + 470MHz Rod Antenna | 470MHz Rubber Rod Antenna | 8~10km | Outdoor Monitoring Terminal Ready-to-Use |
| E106-868G27P2 + XC-IPX-SMA-15 | 868MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 to SMA Adapter Cable | SMA Transfer Cable | 6~8km | EU LoRaWAN Gateway Nodes |
| E106-868G27P2 + TX868-JKS-IPX20 | 868MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 + 868MHz Rod Antenna | 868MHz Rubber Rod Antenna | 6~8km | European Outdoor IoT Equipment |
| E106-915G27P2 + XC-IPX-SMA-15 | 915MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 to SMA Adapter Cable | SMA Transfer Cable | 6~8km | US Industrial Monitoring Devices |
| E106-915G27P2 + TX915-JKS-IPX20 | 915MHz | 27dBm (500mW) | SPI | LLCC68 LoRa Chip | IPEX4 + 915MHz Rod Antenna | 915MHz Rubber Rod Antenna | 6~8km | North America Farm Equipment Control |
| E15-LW-T1 | Wide Band 433/470/868/915MHz | Passive Antenna Cable | N/A (Accessory) | N/A | IPEX4 Male to IPEX4 Female 15cm | Only RF Extension Cable | N/A | Internal PCB Antenna Wiring Extension |
2. Quick Selection Guidance (4 Core Points)
- Select frequency band by target sales region: 433/470MHz for Asia & China domestic market; 868MHz for EU, UK; 915MHz for USA, Canada, Australia, complying with local RF spectrum regulations.
- Choose SKU type based on assembly demand: Purchase standalone E106-XXXG27P2 if you design custom PCB antenna; Select combo with rubber antenna TXxxx-JKS-IPX20 for fast prototype & mass production without extra antenna design; Choose XC-IPX-SMA-15 adapter if you need external large antenna like glass fiber antenna.
- Accessory matching rule: E15-LW-T1 IPEX extension cable is used to extend internal antenna wiring inside plastic enclosures, suitable for products with limited internal space.
- Hardware interface note：All E106-G27P modules are pure SPI hardware modules without built MCU firmware, require external MCU (STM32/PIC etc.) to drive via SPI register configuration.
