The E290 Series is a high-performance wireless communication solution based on the new generation PAN3029 / PAN3060 RF chips. Featuring ChirpIoT™ modulation technology, it offers significantly better anti-interference and longer communication distances (up to 16km) compared to traditional FSK/GFSK. Available in various power levels (20dBm to 30dBm), this series is designed for ultra-low power, long-range industrial and smart home IoT applications.
Available in SMD Modules and Plug-and-Play Development Kits
ChirpIoT™ Modulation
Next-gen spread spectrum for superior penetration and anti-jamming.
Ultra-Low Power
Deep sleep current as low as 0.2μA, ideal for battery-powered sensors.
Long Range (16km)
High-power versions (30dBm) achieve up to 16km line-of-sight range.
Easy Integration
Standard SPI/UART interfaces and AT command support for rapid R&D.
Technical Specifications
| Chip Solution | Panchip PAN3029 / PAN3060 |
|---|---|
| Frequency Band | 410.125MHz ~ 493.125MHz (Supports 433/470MHz) |
| Transmit Power | 20dBm (100mW) / 30dBm (1W) Optional |
| Distance (Max) | 5km (20dBm) / 10km - 16km (30dBm) |
| Modulation | ChirpIoT™ (Spread Spectrum), FSK, GFSK |
| Interface Type | SPI / UART (TTL Level) |
| Operating Temp | -40℃ to +85℃ (Industrial Grade) |
| Power Supply | 3.3V - 5.5V DC (Depending on model) |
| Certification | SRRC, CE, RoHS Compliant |
| Data Updated | May 2026 |
Interface & Pin Definition
Standardized Pin Layout for Seamless Hardware Integration
The E290 series modules use a stamp-hole (SMD) and DIP-compatible design. Key pins include SPI (MISO/MOSI/SCK/NSS) for data and GPIOs for IRQ/Busy/Reset signals.
Ideal Applications
Remote reading for water, gas, and electricity meters
Wireless door locks, smoke alarms, and HVAC sensors
Long-range soil monitoring and irrigation control
PLC data transparent transmission and environment monitoring
Warehouse logistics and outdoor equipment status tracking
Developer Resources
Full technical documentation, AT Command manuals, and hardware design guides.
📄 Download User Manual 💻 Demo Source CodeFrequently Asked Questions
Q: What is the benefit of PAN3029/3060 over SX1262/SX1268?
A: The PAN series chips offer similar ChirpIoT™ modulation technology with highly competitive cost-efficiency and stable supply chains, making them ideal for mass-market IoT projects without compromising performance.
Q: Can I use this with Arduino or Raspberry Pi?
A: Yes. The module supports SPI and UART (TTL) communication, which are compatible with standard microcontrollers like ESP32, Arduino, and single-board computers like Raspberry Pi.
Q: How do I achieve the maximum communication distance?
A: Maximum distance is achieved in "line-of-sight" conditions with high-gain antennas (Sucker or Whip antennas), lower air data rates (0.5kbps), and placing the antenna as high as possible above ground.
