Lightweight Antenna

Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.

1. Lightweight IoT Antenna Series - Sub-Product Line Filter

Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.

Sub-Series Code	Antenna Type	Form Factor & Material	Installation / Interface	Best Application Scenarios
FPC	Flexible Printed Circuit	Ultra-thin, bendable, lightweight tape	IPEX-1 / IPEX-3 / IPX	Internal mounting on curved surfaces, compact smart home devices.
PCB	Printed Circuit Board	Rigid board, compact size	IPEX / SMA-J	Internal flat mounting, routers, gateways requiring stable structural gain.
TH	Spring Antenna	Coiled copper spring, highly compact	PCB Solder (Through-hole)	Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks).
JK / JKD	Rubber / Foldable Antenna	TPEE material, straight or 90-degree foldable	SMA-J (Male thread, inner pin)	External cabinet mounting, modems, adaptable signal orientation.
JZ / JZG	Glue Stick / Rubber Rod	Straight, sturdy cylinder shape	SMA-J	Standard external communication modules, durable outdoor/industrial use.
JW	Elbow Rubber Antenna	Fixed 90-degree right angle	SMA-J	Wall-mounted terminals where straight antennas take up too much vertical space.
JZLW	Screw Fixed Rubber Rod	High gain, screw-fixed base	IPEX-1 to external rod	Equipment cabinets, logistic fleets, property security bases.

2. Model Selection by Parameters (Frequency & Form Factor)

Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.

Frequency Band	Recommended FPC/PCB (Internal)	Recommended Rubber (External)	Recommended Spring (Solder)
170MHz / 230MHz (VHF)	-	TX170-JKD-20, TX230-JK-11	-
433MHz (UHF, LoRa)	TX433-FPC-5711, TX433-PCB-3207	TX433-JZ-5, TX433-JKD-20, TX433-JW-5	TX433-TH-3, SW433-TH32DN
868MHz / 915MHz (LoRaWAN)	TX915-FPC-4510	TX868-JZ-5, TX915-JK-11, TX868-JZLW-15	-
2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee)	TX2400-FPC-2509, TX2400-PCB-4811	TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3	-
LTE / GSM / NB-IoT (Cellular)	TX4G-FPC-4015, TX4G-PCB-125014	TXGN-JKD-20, TXGN-JW-5	-

3. Quick Selection Guide

Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.

4. Frequently Asked Questions (FAQ)

Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?

A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.

Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?

A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.

Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?

A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.

Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?

A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.

EBYTE TX868-JZ-5 vertical high gain 868MHz antena for wireless communication and others

$0.82

Ebyte's antena 3 0 has an expansive variety of antennas that excel in a myriad of applications. It's the perfect choice for those seeking a relatively small and reliable antenna...

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину

433MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 2.0dBi Gain High-quality Omnidirectional Antenna TX433-JW-5

$0.99

433MHz RF Outdoor Omni directional Antenna Wireless Network Equipment Module Communication Antanna Omni [Frequency]：433M [Interface]：SMA-J [Resistance]：50Ω [Gain]：2.0dBi [Standing wave (SWR)]：≤1.5 [Introduction]：Rubber antenna

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину

EBYTE OEM ODM TX433-FPC-3208 433mhz FPC internal antenna high gain omni antenna fpc manufacturer antenna

$0.55

wireless module antenna iot solutions 433mhz FPC internal antenna high gain omni antenna soft flexibility aerial [Gain]：2.0dBi [Interface]：IPX [Standing wave (SWR)]：≤1.5 [Frequency]：423~443MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：1±0.1g [Introduction]：TX433-FPC-3208 is...

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину

TX433-PCB-3207 433mhz PCB internal uhf antenna IPX wireless iot 4g omnidirectional antenna for communication

$0.39

433mhz PCB internal uhf antenna IPX wireless iot 4g omnidirectional antenna for communication [Gain]：2.0dBi [Interface]：IPX [Standing wave (SWR)]：≤1.5 [Frequency]：423~443MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：1±0.1g [Introduction]：TX433-PCB-3207 is a 433MHz PCB...

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину

EBYTE TX433-JZ-5 high gain antenna 433MHz for module iot communication glue stick antenna 433mhz antenna

$0.68

2.0dBi high gain antenna 433MHz for module iot communication [Gain]：2.0dBi [Interface]：SMA-J [Standing wave (SWR)]：Less than 1.5 [Frequency]： 433MHz [Resistance]：50Ω [Feature]：Ultra -short straight antanna [Introduction]：Ebyte's Antenna has the industry’s broadest selection of...

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину

CDEBYTE TX433-FPC-2906 433MHz PCB Antenna FPC Antenna Series Build in Antenna Omnidirectional 2-3dbi Lora IPEX IPX Antenna

~~$23.96~~$0.49

[Frequency]:TX433-FPC-2906 mini internal FPC patch glue antenna with 90 degree flying 1.13mm lead to ufl [Gain]：2.0dBi [Interface]：welded [Standing wave (SWR)]：≤1.5 [Frequency]：423~443MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：1±0.1g [Introduction]：TX433-FPC-2906 is...

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину

CDEBYTE 490MHz 2.0dBi SMA-J Glue Rod Antenna Omni Omnidirectional Exterial Aerial TX490-JZ-5

$1.20

TX490-JZ-5 Rubber antenna 50mm 2.0 dBi 490mhz rubber antenna wireless module antenna for wireless communication and others [Frequency]：490M [Interface]：SMA-J [Resistance]：50Ω [Gain]：2.0dBi [Standing wave (SWR)]：≤1.5 [Introduction]：The TX490-JZ-5 antenna has been tested...

Быстрый просмотрБыстрый просмотр Добавить в корзинуДобавить в корзину