ECK20-6Y28A5ME8G-C Embedded core board NXP Cortex-A7 core i.MX6ULL processor Support Linux, support QT
[Processor model]：MCIMX6Y2CVM08AB
[Processor frequency]：792MHz
[Memory capacity]：512MB
[Product size]：38*38*3mm
[Introduction]：ECK20-6Y2XA series core board is based on NXP Cortex-A7 core i.MX6ULL processor, using stamp hole connection to connect low-cost, low-power, cost-effective, high-reliability embedded core board. Widely used in industrial control, HMI, IoT and other fields. The processor uses a single ARM Cortex-A7 core with a maximum main frequency of 792MHz, which can provide 1 LCD display, 1 digital camera, Two 10/100 Ethernet, 2 USB OTG, 8 UART, 2 SDIO, 2 CAN, multiple GPIO and other rich I/O resources.
| Product | Function description | |
| processor | MCIMX6Y2CVM08AB； | |
| i.MX 6ULL Applications Processors for Industrial； | ||
| Single Arm Cortex-A7 core, 792MHz； | ||
| storage | Memory | On-board DDR3L SDRAM, 16-bit wide, 256MB/512MB optional; |
| FLASH | On-board 8GB eMMC / On-board 512MB parallel NAND FLASH optional; | |
| show | 1 parallel display interface, maximum resolution supports WXGA (1366×768@60fps); | |
| Supports 24bit, 18bit, 16bit, and 8bit parallel display output; | ||
| Camera | 1 parallel camera interface, supporting up to 24bit data and 85MHz clock; | |
| Support 24bit, 16bit, 10bit, 8bit data input; | ||
| Support BT.656 data format; | ||
| USDHC | 2-way MMC/SD/SDIO card interface; | |
| 1bit or 4bit mode SD/SDIO card, supporting UHS-I SDR-104 mode at most; | ||
| 1bit, 4bit or 8-bit mode MMC card, maximum support for DDR mode; | ||
| 4bit or 8-bit mode eMMC, supports up to HS200 mode; | ||
| USB | 2-way USB 2.0 OTG; | |
| Audio | 3 channels I2S/SAI/AC97, maximum 1.4Mbps per channel; | |
| Support ESAI audio interface; | ||
| Support SPDIF audio interface; | ||
| serial port | 8-channel UART, maximum 5Mbps per channel; | |
| SPI | 4 channels of eCSPI (Enhanced CSPI), maximum 52Mbps per channel; | |
| Ethernet | 2-way 10/100 Ethernet MAC, supports IEEE1588, supports RMII; | |
| I2C | 4 channels of I2C, maximum 400Kbps per channel; | |
| CAN | 2-way CAN interface, supporting CAN 2.0B protocol; | |
| PWM | 8-channel PWM, maximum clock frequency 66MHz; | |
| ADC | 2 12-bit ADCs, supporting up to 10 input channels; | |
| EIM | Supports EIM (External Interface Module), which can be expanded to NOR FLASH or PSRAM, etc.; | |
| JTAG | Support System JTAG Controller; | |
| TIMER | 2 GPT (General Purpose Timer) timer functions; | |
| WDT | 3 Watchdog timer functions; | |
| keyboard | 1 8×8 matrix keyboard function; | |
| GPIO | 105 (maximum) GPIO channels, supporting interrupt function; | |
