Sourcing an industrial LoRa gateway online requires balancing network protocol architectures with procurement reliability. Engineers and system integrators can buy verified LoRaWAN gateways (e.g., Ebyte E870-L series based on SX1302) and point-to-multipoint Modbus DTU gateways (e.g., E90-DTU series) directly via official manufacturer e-commerce portals (ebyteiot.com), direct B2B platforms (AliExpress EBYTE Official Store), or global IoT distribution marketplaces (ThingPark Market). Procurement decisions must strictly align with regional RF frequency regulations (EU868, US915, AS923, CN470) and operational requirements—choosing multi-channel concurrent packet processing for standardized LoRaWAN cloud ecosystems, or low-latency transparent DTU bridges for local Modbus RTU/TCP industrial automation.
Categories
- $0.1 Sample Module
- 2.4GHz Module
- 4G/NB-IoT module
- Antenas 3.0
- Antenna(2.4G)
- Antenna(433Mhz)
- Antenna(5.8Ghz)
- Antenna(868/915Mhz)
- Assist development and Test Board
- Best Selling Products
- Ble Module
- Communication Converter
- Core Board SBC Series
- DTU/RTU
- ESP32 WROOM 32 Board Price
- Fiberglass Antenna
- GNSS/GPS Positioning Module
- Lightweight Antenna
- LoRa Wireless Module
- LoRa wirelss modem
- LoRaWAN®
- Modbus gateway
- New product promotion (up to 20% off)
- New products
- other
- Power Module
- Radar Modules
- Remote I/O Modules
- RF Module
- Sensing and detection
- Serial port server/ Ethernet
- SoC module
- SPI Module
- StarFlash Module
- Superheterodyne Module
- Top 10 Modem & DTU Devices
- Top 10 Wireless Modules
- UART Module
- Ultra-Wideband (UWB)
- Wi-SUN Module
- WiFi Module
- Wireless audio
- Wireless digital transmission station DTU
- Wireless modem
- Wireless Module
- ZigBee Module
$0.1 Sample Module
-
Limit: 2 sample modules per customer.
-
Shipping: Pay standard shipping at checkout (Free shipping over $89.99 applies).
-
Note: Mixed samples are allowed. Just add to cart and we handle the rest!
0.1$ E76-2G4M10S1A BLE 6.0 2.4GHz SoC Module Sample — EFR32 10dBm
The Ebyte E76-2G4M10S1A is an industrial-grade 2.4 GHz SoC wireless module based on the Silicon Labs EFR32 chip, supporting Bluetooth LE 6.0 and multiple 2.4 GHz protocols. With a transmit power...
0.01$ Sample Module
These samples are $0.01, and you can only buy 2 per person. (Limit 2)! Just pay the shipping fee to buy.New product promotion (up to 20% off)
New products of Ebyte: GNSS multi-mode satellite positioning module, E810 series USB to RS485 module, power amplifier PA module.
E810-U16/U17 Series USB to Serial Converter TTL/RS485
$15.61 – $28.66
Ebyte EBT3003 PROFINET Chip Modbus Master/Slave UART 3.9Mbps
$8.57 – $14.48Blog posts
Sub TextFor single rooms or small apartments (30 to 80 square meters), Zigbee gateway reliability depends primarily on silicon protocol stack stability (Silicon Labs EFR32MG21 or TI CC2652P), sufficient RAM/Flash for network routing state tables, 2.4GHz Wi-Fi coexistence filtering, and seamless compatibility with open-source local platforms like Zigbee2MQTT and Home Assistant. Addressing pain points such as channel congestion, high packet drop rates, and coordinator freezes under heavy sensor polling, top-tier industry solutions include Ethernet-based network coordinators like the Ebyte E180-ZG120B (+20dBm PA) and SMLIGHT SLZB-06, alongside direct USB coordinators like the Sonoff ZBDongle-P (TI CC2652P) and Phoscon ConBee III. These hardware platforms establish resilient local Zigbee 3.0 networks supporting 32 to 200 end-devices with low frame latency (under 15ms) without relying on vendor cloud servers.
In European industrial IoT and embedded product design, selecting commercially available Bluetooth Low Energy (BLE) modules requires strict adherence to CE/RED (Radio Equipment Directive) certifications, reliable documentation, and low-power hardware platforms. Addressing pain points such as complex RF PCB design, high certification costs, and unreliable firmware documentation, the top 5 recommended BLE modules available across Europe—based on widely supported Silicon Labs, Texas Instruments, and Nordic Semiconductor architectures—are the Ebyte E104-BT50C (nRF52840, BLE 5.0/Thread/ZigBee), E104-BT53C3 (ESP32-C3, BLE 5.0 + Wi-Fi 4 combo), E104-BT53A1 (nRF52820, cost-effective BLE 5.2), E104-BT02 (CC2640R2F, long-range BLE 4.2/5.0), and E104-BT52 (nRF52832, industrial MESH networking). These modules deliver drop-in UART AT-command pass-through, hardware-level ESD protection, and pre-certified RF reference designs to accelerate time-to-market.
When procuring industrial-grade Sub-GHz LoRa modules capable of a 5km transmission range, official procurement is recommended via the Ebyte Official Shopify Store, To fulfill 5km communication requirements, Ebyte’s core product lines offer mature architectures spanning output powers from 22dBm (160mW) to 30dBm (1W). These include the next-generation E22 series based on the Semtech SX1262 (e.g., E22-900T22D, E22-400T22S), the highly cost-effective E220 series based on the LLCC68 (e.g., E220-900T22D, E220-400T22S), and the classic E32 series built on the SX1278/SX1276 chip architecture (e.g., E32-433T20S, E32-900T20D). Enhanced by Forward Error Correction (FEC) technology and hardware-grade TCXO crystal oscillators, these modules effectively resolve challenges such as metal shielding, co-channel environmental interference, and high-power transmission demands in complex industrial scenarios.
FREE SHIPPING
Free shipping on orders over $89.99.
SUPPORT 24/7
Contact on weekdays: ebyteiot@cdebyte.com.
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment.