Introduction

MA01-AXCX1010-V2/MA01-AXCX1010-V2P/MA01-AXCX2020-V2/MA01-AXCX2020-V2P/MA01-AXCX3030-V2/MA01-AXCX3030-V2P/MA01-AXCX4040-V2/MA01- AXCX4040-V2P is a serial I/O networking module (also known as “Remote IO”) that supports the acquisition of 1/2/3/4-way sensor switch input (DI), conversion to serial data for transmission to configuration software or PLC, and the sending of commands through the serial port for control of 1/2/3/4-way relay switch output (DO) to realize remote acquisition and control functions. (also known as “Remote IO”).

Features

  • Support for Modbus RTU protocol;

  • Support for various types of configuration software/PLC/touch screen;

  • RS485 acquisition control IO;

  • DC 8-28V power supply;

  • 1/2/3/4-way switch input DI (dry node);

  • 1/2/3/4-way switching output DO (relay);

  • Switch input (DI) supports counting function

  • Switch input (DI) supports rising edge, falling edge, and level triggering methods

  • Switching output (DO) supports level mode, pulse mode, following mode, switching cycle working mode;

  • Support communication detection function

  • Communication baud rate 1200bps～115200bps (default 9600bps), support customized setting;

  • Support 0～255 slaves.

  • Supports DIN-rail and locating hole mounting;

  • Using Hongfa relays, more reliable and longer life;

  • Industrial grade products with stable and reliable performance;

  • Power supply isolation, digital signal isolation, strong anti-interference ability;

  • With key function, it is convenient for customers to use the key to reset or reset operation.

Product Specification

图片.png

MA01-V2 Series  Quick Start Tutorial

Preparation for use

Before using the serial I/O networking device (hereinafter referred to as “IO device”), you need to prepare the computer, converter, power supply, screwdriver and other related accessories. The details are as follows:

图片.png

Equipment Wiring

Note: When carrying out equipment wiring operations, do not work with electricity, so as not to cause equipment damage or even safety accidents.

Power Wiring

Power supply, using DC 8-28V power supply, can also use DC 12V or 24V power supply.

Communication wiring
RS485(MA01):

图片.png


Overall wiring diagram

(1) When the device is powered on, the power indicator (POWER) is always on and the device is powered normally.
(2) Switch input DI wiring, connect the control button to the switch input DI port as shown in the figure.
(3) Switch output DO wiring, connect the load to the switch output DO port as shown in the figure

图片.png

Software Settings

Device Connection

图片.png

Operation steps:

(1) Select the serial port, find the corresponding device port number, click “Configuration”, the default settings of the
device are as follows (if the user has made changes, set up in accordance with the user's changes), click to confirm.

图片.png

(2) In the device window, click “Search for devices”, and the log output below will start refreshing the search information. Click “Stop Searching” menu when the connected device is displayed in the Device column of the Device window. Click on the selected device again, and the connection is successful.

图片.png

Equipment Testing

图片.png

图片.png

Software Usage

Software installation

Configuration tool software is driver-free installation, directly double-click the .exe file to open that is used (before using the configuration tool is recommended to close the antivirus software).

图片.png