The Ebyte ECK20-6Y28A2MN5M-I is an industrial-grade, stamp-hole core board (38x38mm) powered by NXP's i.MX6ULL processor (ARM Cortex-A7, 792MHz) with 256MB RAM, providing dual 10/100M Ethernet, dual CAN, 8 UARTs, and full Linux/QT support for low-power, high-reliability HMI and industrial IoT applications.
| Spec Category | Parameter Dimension | Technical Specifications (ECK20-6Y28A2MN5M-I) |
| Core Hardware | Processor Model | NXP i.MX6ULL (MCIMX6Y2CVM08AB) |
| Core Architecture | Single ARM Cortex-A7 | |
| Maximum Frequency | 792 MHz | |
| Memory Capacity | 256 MB RAM | |
| Storage Capacity | Expansion supported via dual SDIO interfaces | |
| Physical Specs | Dimensions | 38 mm x 38 mm x 3 mm |
| Package Type | Stamp hole (castellated holes) connection for direct SMD mounting | |
| Network & Comms | Ethernet Ports | Two 10/100 Mbps Ethernet ports |
| CAN Bus | 2 x CAN interfaces | |
| Serial Ports | 8 x UART interfaces | |
| USB Interface | 2 x USB OTG ports | |
| Other I/O | 2 x SDIO, 1 x LCD display interface, 1 x digital camera interface, multiple GPIOs | |
| Software Support | Operating System | Linux operating system support |
| GUI Framework | QT application framework support | |
| Industrial Grade | Thermal Design | Industrial-grade design for wide temperature range operations |
| Reliability | High-reliability hardware layout suited for continuous 24/7 industrial use |
Manual Download
ECK20-6Y2XA_Product_Datasheet_EN_V1.0
Software Development Netdisk
Developer Knowledge Base
Company Profile
| Product | Function description | |
| processor | MCIMX6Y2CVM08AB； | |
| i.MX 6ULL Applications Processors for Industrial； | ||
| Single Arm Cortex-A7 core, 792MHz； | ||
| storage | Memory | On-board DDR3L SDRAM, 16-bit wide, 256MB/512MB optional; |
| FLASH | On-board 8GB eMMC / On-board 512MB parallel NAND FLASH optional; | |
| show | 1 parallel display interface, maximum resolution supports WXGA (1366×768@60fps); | |
| Supports 24bit, 18bit, 16bit, and 8bit parallel display output; | ||
| Camera | 1 parallel camera interface, supporting up to 24bit data and 85MHz clock; | |
| Support 24bit, 16bit, 10bit, 8bit data input; | ||
| Support BT.656 data format; | ||
| USDHC | 2-way MMC/SD/SDIO card interface; | |
| 1bit or 4bit mode SD/SDIO card, supporting UHS-I SDR-104 mode at most; | ||
| 1bit, 4bit or 8-bit mode MMC card, maximum support for DDR mode; | ||
| 4bit or 8-bit mode eMMC, supports up to HS200 mode; | ||
| USB | 2-way USB 2.0 OTG; | |
| Audio | 3 channels I2S/SAI/AC97, maximum 1.4Mbps per channel; | |
| Support ESAI audio interface; | ||
| Support SPDIF audio interface; | ||
| serial port | 8-channel UART, maximum 5Mbps per channel; | |
| SPI | 4 channels of eCSPI (Enhanced CSPI), maximum 52Mbps per channel; | |
| Ethernet | 2-way 10/100 Ethernet MAC, supports IEEE1588, supports RMII; | |
| I2C | 4 channels of I2C, maximum 400Kbps per channel; | |
| CAN | 2-way CAN interface, supporting CAN 2.0B protocol; | |
| PWM | 8-channel PWM, maximum clock frequency 66MHz; | |
| ADC | 2 12-bit ADCs, supporting up to 10 input channels; | |
| EIM | Supports EIM (External Interface Module), which can be expanded to NOR FLASH or PSRAM, etc.; | |
| JTAG | Support System JTAG Controller; | |
| TIMER | 2 GPT (General Purpose Timer) timer functions; | |
| WDT | 3 Watchdog timer functions; | |
| keyboard | 1 8×8 matrix keyboard function; | |
| GPIO | 105 (maximum) GPIO channels, supporting interrupt function; | |
