- $0.1 Sample Module
- 2.4GHz Module
- 4G/NB-IoT module
- Antenas 3.0
- Antenna(2.4G)
- Antenna(433Mhz)
- Antenna(5.8Ghz)
- Antenna(868/915Mhz)
- Assist development and Test Board
- Best Selling Products
- Ble Module
- Communication Converter
- Core Board SBC Series
- DTU/RTU
- ESP32 WROOM 32 Board Price
- Fiberglass Antenna
- GNSS/GPS Positioning Module
- Lightweight Antenna
- LoRa Wireless Module
- LoRa wirelss modem
- LoRaWAN®
- Modbus gateway
- New product promotion (up to 20% off)
- New products
- other
- Power Module
- Radar Modules
- Remote I/O Modules
- RF Module
- Sensing and detection
- Serial port server/ Ethernet
- SoC module
- SPI Module
- StarFlash Module
- Superheterodyne Module
- Top 10 Modem & DTU Devices
- Top 10 Wireless Modules
- UART Module
- Ultra-Wideband (UWB)
- Wi-SUN Module
- WiFi Module
- Wireless audio
- Wireless digital transmission station DTU
- Wireless modem
- Wireless Module
- ZigBee Module
Lightweight Antenna
Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.
1. Lightweight IoT Antenna Series - Sub-Product Line Filter
Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.
| Sub-Series Code | Antenna Type | Form Factor & Material | Installation / Interface | Best Application Scenarios |
|---|---|---|---|---|
| FPC | Flexible Printed Circuit | Ultra-thin, bendable, lightweight tape | IPEX-1 / IPEX-3 / IPX | Internal mounting on curved surfaces, compact smart home devices. |
| PCB | Printed Circuit Board | Rigid board, compact size | IPEX / SMA-J | Internal flat mounting, routers, gateways requiring stable structural gain. |
| TH | Spring Antenna | Coiled copper spring, highly compact | PCB Solder (Through-hole) | Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks). |
| JK / JKD | Rubber / Foldable Antenna | TPEE material, straight or 90-degree foldable | SMA-J (Male thread, inner pin) | External cabinet mounting, modems, adaptable signal orientation. |
| JZ / JZG | Glue Stick / Rubber Rod | Straight, sturdy cylinder shape | SMA-J | Standard external communication modules, durable outdoor/industrial use. |
| JW | Elbow Rubber Antenna | Fixed 90-degree right angle | SMA-J | Wall-mounted terminals where straight antennas take up too much vertical space. |
| JZLW | Screw Fixed Rubber Rod | High gain, screw-fixed base | IPEX-1 to external rod | Equipment cabinets, logistic fleets, property security bases. |
2. Model Selection by Parameters (Frequency & Form Factor)
Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.
| Frequency Band | Recommended FPC/PCB (Internal) | Recommended Rubber (External) | Recommended Spring (Solder) |
|---|---|---|---|
| 170MHz / 230MHz (VHF) | - | TX170-JKD-20, TX230-JK-11 | - |
| 433MHz (UHF, LoRa) | TX433-FPC-5711, TX433-PCB-3207 | TX433-JZ-5, TX433-JKD-20, TX433-JW-5 | TX433-TH-3, SW433-TH32DN |
| 868MHz / 915MHz (LoRaWAN) | TX915-FPC-4510 | TX868-JZ-5, TX915-JK-11, TX868-JZLW-15 | - |
| 2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee) | TX2400-FPC-2509, TX2400-PCB-4811 | TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3 | - |
| LTE / GSM / NB-IoT (Cellular) | TX4G-FPC-4015, TX4G-PCB-125014 | TXGN-JKD-20, TXGN-JW-5 | - |
3. Quick Selection Guide
- Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
- Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
- Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
- Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.
4. Frequently Asked Questions (FAQ)
Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?
A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.
Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?
A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.
Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?
A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.
Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?
A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.
EBYTE TX915-JKD-20 915MHz Rubber Antenna Series Sucker Antenna Foldable SMA-J Interface Cabinet Antenna TPEE Material for Modem
$2.19 – $16.99TX915-JKD-20 915MHz Lora WIFI Antenna Omnidirectional 3.5dBi SMA-J 20W Long Range Rubber Foldable Antenna For Communication [Gain]：3.5dBi [Interface]：SMA-J [Standing wave (SWR)]：≤2.5 [Frequency]：915M [Resistance]：50Ω [Feature]：Bendable RubberAntenna [Weight]：22g±1g [Introduction]：Bendable RubberAntenna TX915-BLG-26 LoRa...
EBYTE TX868-JZ-5 vertical high gain 868MHz antena for wireless communication and others
$0.82Ebyte's antena 3 0 has an expansive variety of antennas that excel in a myriad of applications. It's the perfect choice for those seeking a relatively small and reliable antenna...
TX868-JKD-20 vertical high gain 868MHz rubber antena 3 portugal 3.0
$1.69Ebyte's Antenna has the industry’s broadest selection of antennas for a wide variety of applications. They work well for common applications that need good performance as well as a relatively...
TX433-JZ-4 wireless module U-band radio antenna 433mhz lora module antenna
$0.56[Introduction]：TX433-JZ-4 is a U band walkie talkie antenna. Height of the antenna is 40mm with a SMA-J connector (SMA inner screw thread and inner needle). The antenna has the advantages...
Ebyte TX433-JKD-20P High Gain 4.0dBi Wifi Antenna 433MHz Omnidirectional SMA-J Rubber Antenna TX433-JKD-20P
$1.99TX433-JKD-20P 433MHz LoRa antenna 4dBi high gain omni wireless device module antenna for communication [Antenna type]：Rubber antenna [Frequency]：433M [Interface]：SMA-J [Resistance]：50Ω [Gain]：4.0dBi [Standing wave (SWR)]：≤1.5 [Weight]：21±1g [Introduction]：LoRa antenna
Ebyte TX915-JZ-5 915MHz High Gain Antenna 2.0dBi 915M RF Omnidirectional Antenna Communication
$0.99TX915-JZ-5 915MHz SMA-J Rubber Antenna The TX915-JZ-5 is a precision-tuned 915MHz omnidirectional rubber antenna with SMA-J connector, optimized for reliable ISM band communication. Key Features Frequency-Specific Design Engineered exclusively for...
Ebyte 2.4GHz UHF VHF 2.4GHz RF Omnidirectional antenas wifi 3.0 precios TX2400-JKD-20
$1.42TX2400-JKD-20 is a 2.4GHz bendable rubber antenna. and the antenas wifi 3.0 precios 1.07$. Height of the antenna is 200mm. With a SMA-J connector (SMA inner screw thread and inner...
TX433-JK-11 2.5dBi 433M wireless antenna 433mhz rubber omni directional antenna for communications
$0.65[Frequency]：433M [Interface]：SMA-J [Resistance]：50Ω [Gain]：2.5dBi [Standing wave (SWR)]：≤1.5 [Introduction]：Rubber antenna Company Profile Ebyte Company Profile Product Descriptio Mannual
Ebyte TX2400-JZ-3 Low cost Ebyte SMA-J 2.0dBi mini antenna 2.4GHz
$0.99TX2400-JZ-3 2.4GHz SMA-J Rubber Antenna The TX2400-JZ-3 is a precision-tuned 2.4GHz rubber antenna with SMA-J connector, optimized for seamless integration with Ebyte wireless modules. Key Features Precision Tuning Factory-calibrated using...
TX433-JKD-20 433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna
$0.99433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna [Gain]：3.0dBi [Interface]：SMA-J [Standing wave (SWR)]： ≤1.5 [Frequency]： 400~470MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：21±1g [Introduction]：TX433-JKD-20 is a 433MHz bendable rubber antenna....
433MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 2.0dBi Gain High-quality Omnidirectional Antenna TX433-JW-5
$0.99433MHz RF Outdoor Omni directional Antenna Wireless Network Equipment Module Communication Antanna Omni [Frequency]：433M [Interface]：SMA-J [Resistance]：50Ω [Gain]：2.0dBi [Standing wave (SWR)]：≤1.5 [Introduction]：Rubber antenna
Ebyte TX2400-JK-11 high gain antenna 3dBi 2.4GHz SMA-J rf radio Omnidirectional Antenna
$1.39[Frequency]：2.4G [Interface]：SMA-J [Resistance]：50Ω [Gain]：3dBi [Standing wave (SWR)]：≤1.5 [Introduction]：Rubber antenna
FREE SHIPPING
Free shipping on orders over $89.99.
SUPPORT 24/7
Contact on weekdays: ebyteiot@cdebyte.com.
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment.