[Processor Model]:T113-S
[Processor Frequency]:1.2GHz
[Memory]:128MB
[Storage]:8GB
[Size]:65*56mm
[Product weight]:35 ± 5g
[Introduction]:Ebyte has launched the cost-effective single-board computer (SBC) ECB31-PB, based on the Allwinner T113-S series processor. Compatible with the Raspberry Pi 3A, it boasts a compact design and rich interfaces. Functional interfaces are designed with ESD and TVS protection devices to prevent damage from surges, static electricity, and other interference. Its design surpasses that of standard development boards and is suitable for mass production in industrial scenarios.
[Processor Model]:T113-S
[Processor Frequency]:1.2GHz
[Memory]:256MB
[Storage]:8GB
[Size]:65*56mm
[Product weight]:35 ± 5g
Power input |
5V_3A, shares the Type-C interface with USB DEVICE; |
|
processor |
Allwinner T113-S processor: Dual Arm Cortex-A7 core, 1.2GHz; RISC-V; HiFi4 DSP; |
|
storage | Memory |
128/256MB,DDR3; |
FLASH |
8GB,eMMC; |
|
show |
1-way 26-pin FPC MIPI display interface, supports 4-lane, maximum resolution supports 1080P (1920×1080@60fps), and supports touch screen; |
|
1-channel CVBS output, supports NTSC and PAL formats, 2.0mm pitch pin lead-out; |
||
2-way CVBS input, supporting NTSC and PAL formats, 2.0mm pitch pin lead-out; |
||
USB HOST |
2-way USB2.0 HOST; |
|
USB DEVICE |
1-way USB DEVICE, Type-C interface type, shared with the power input, can be used for burning programs; |
|
4G |
1-way 4G module slot, MINI-PCIe connector; |
|
Network port |
1 10/100/1000M adaptive RJ45 Ethernet port; |
|
Wi-Fi |
1 line 2.4G & 5G Wi-Fi; |
|
SIM card |
1 SIM card slot; |
|
TF card |
1 TF card slot, supports plug-in detection; |
|
Audio |
2-way HP-out, 1-way MIC, 2.0mm pitch pin lead-out; |
|
debug |
1 UART debug printing serial port (UART0), 2.54mm pitch pin lead-out; |
|
CAN |
2-way CAN standard protocol interface, 2.0mm pitch pin lead-out; |
|
GPIO |
18-channel GPIO, function multiplexing, expansion interface lead-out; |
|
Serial Port |
1 UART communication serial port, TTL level, function multiplexing, expansion interface lead out; |
|
SPI |
1-way SPI, function multiplexing, expansion interface lead out; |
|
PWM |
4-channel PWM, function multiplexing, extended interface lead-out; |
|
I2C |
1-way I2C, extended interface lead out; |
|
button |
1 reset button; |
|
indicator light |
1 power indicator light; |
|
1 running indicator light; |
||
1 4G status light; |
||
Watchdog |
Support on-chip watchdog function; |
|
RTC |
1-way 1.25mm pitch RTC battery holder; |
|
Power output |
2-way 5V power output, extended interface lead out; |
|
2-way 3.3V power output, extended interface lead out; |