Product Overview
The Ebyte E105-WBS36S is a tri-mode wireless combo module integrating SLE1.0 (NearLink), Wi-Fi 6 (802.11ax), and Bluetooth 5.4 (BLE) on a single compact SMD footprint. It delivers up to 20 dBm transmit power with transparent serial transmission, making it ideal for industrial IoT, smart home, and consumer electronics applications that demand multi-protocol coexistence and strong anti-interference performance.
- Protocols: SLE1.0 (NearLink) · Wi-Fi 6 · BLE 5.4
- TX Power: 20 dBm (max)
- Interface: UART transparent transmission
- Form Factor: SMD stamp-hole, compact PCB integration
- Variants: E105-WBS36S (standard) · E105-WBS36S-TB (test board) · E105-WBS36SP (IPEX antenna)
- Applications: Smart home, industrial automation, wearables, consumer IoT, wireless audio/peripherals
Technical Specifications
| Model | E105-WBS36S / E105-WBS36S-TB / E105-WBS36SP |
| Wireless Protocols | SLE1.0 (NearLink) · Wi-Fi 6 (802.11ax, 2.4GHz) · Bluetooth 5.4 (BLE) |
| TX Power | Up to 20 dBm |
| Frequency Band | 2.4 GHz (Wi-Fi 6 / BLE / NearLink) |
| Communication Interface | UART (transparent transmission) |
| Antenna Interface | PCB onboard antenna (E105-WBS36S) / IPEX connector (E105-WBS36SP) |
| Form Factor | SMD stamp-hole, compact module |
| Power Supply | 3.3V DC |
| Anti-interference | Multi-protocol coexistence, hardware-level interference suppression |
| Certifications | FCC · CE · RoHS · SRRC |
| Applications | Smart home, industrial IoT, wearables, wireless audio, consumer electronics |
| Updated | April 2026 |
Key Features
Tri-Mode NearLink + Wi-Fi 6 + BLE 5.4 Coexistence
The E105-WBS36S integrates three cutting-edge wireless standards on a single chip. SLE1.0 (NearLink) delivers ultra-low latency and high reliability for device-to-device links; Wi-Fi 6 provides high-throughput connectivity; BLE 5.4 enables energy-efficient peripheral communication — all operating simultaneously with hardware-level coexistence management.
20 dBm High-Power Transparent Transmission
With up to 20 dBm output power and UART-based transparent serial transmission, the module integrates seamlessly into existing MCU designs without protocol stack development. Plug-and-play AT command configuration reduces time-to-market for IoT product teams.
Strong Anti-Interference Architecture
Hardware-level frequency coordination and dynamic spectrum management ensure stable operation in dense RF environments (e.g., factories, smart buildings). Suitable for deployments where 2.4 GHz congestion is a concern.
2. Air freight available; delivery approximately 2–7 days (pickup at destination airport required).
3. Sea freight available for large-volume orders; approximately 30 days transit, lower cost.
4. Accepted payment methods: PayPal · Credit Card · L/C · T/T.
- Q: What is NearLink (SLE1.0) and how does it differ from Bluetooth?
- A: NearLink (SLE — Short-range Link Evolved) is a next-generation Chinese wireless standard developed by Huawei and partners. Compared to Bluetooth Classic/BLE, SLE1.0 offers lower latency (<1ms), higher throughput, and improved coexistence in dense environments. The E105-WBS36S supports SLE1.0 alongside BLE5.4 and Wi-Fi 6 for maximum protocol flexibility.
- Q: Can the E105-WBS36S operate all three protocols simultaneously?
- A: Yes. The module features hardware-level multi-protocol coexistence management, allowing SLE1.0, Wi-Fi 6, and BLE5.4 to operate concurrently without significant mutual interference.
- Q: What interface does the module use for host MCU communication?
- A: The module uses a UART interface with transparent transmission mode. AT commands are supported for configuration. No proprietary wireless stack development is required on the host MCU side.
- Q: Is the E105-WBS36S compatible with Arduino or Raspberry Pi?
- A: Yes. The module operates at 3.3V logic. For 5V systems (e.g., Arduino Uno), add a 4–10kΩ pull-up resistor on TXD and AUX pins. Raspberry Pi (3.3V GPIO) connects directly via UART.
- Q: Are you a manufacturer or trading company?
- A: Ebyte is a manufacturer. We operate our own R&D, SMT production lines, and RF testing labs in Chengdu, China.
- Q: Do you support ODM / OEM customization?
- A: Yes — custom firmware, frequency, form factor, logo, and packaging are available for qualified bulk orders. Contact our engineering team for a custom solution brief.
- Q: What certifications does the E105-WBS36S carry?
- A: FCC (Part 15), CE (RED), RoHS, and SRRC. Certificate documents are available upon request.
- Q: What is the warranty and after-sales policy?
- A: 1-year warranty. Contact your assigned sales engineer for RMA or technical support. Sample orders available; bulk orders: 50% deposit + 50% balance before shipment.
- Q: What is the typical lead time?
- A: Standard orders: 3–6 business days. Custom or mass production orders: 15–30 days depending on quantity and specification.
- Q: How can I verify product quality before placing a bulk order?
- A: Request a sample (sample cost + freight applies for first-time customers). We can also provide detailed test reports, photos, and video demonstrations upon request.
