[Data interface]:RS485
[Working voltage]: DC 9~40V
[Protection level]:Industrial EMC level 3
[Product size]:100*54*32mm
[Product weight]:70±5g
[Introduction]:E810-R12 is an isolated repeater (HUB) for 1-way RS-485 to 2-way RS-485 launched by Ebyte. RS485 hub is a communication device that supports 1-way RS-485 master device and 1-way or multiple-way RS-485 slave devices. Photoelectric isolation technology is used to protect the master and slave devices from interference. No configuration is required, and transparent data transmission between the master and slave interfaces. This product is suitable for comprehensive RS485 communication systems such as automation control systems, monitoring systems, alarms, access control systems, IC card charging, meter reading, one-card pass, parking lot charging, etc.
Parameter Name | Parameter Value | Description |
General parameters | Data interface | RS-485 interface |
Baud rate | 300~230400, support custom baud rate | |
Operating voltage | DC 9~40V | |
Protection level | Industrial EMC3 level | |
Isolation voltage | 1.5KV | |
Static protection level | Contact 4 KV, air 8KV | |
Pulse surge | Differential mode 1KV, common mode 2KV | |
Operating temperature and humidity | -40~85℃, 5%~95% (no condensation) | |
Storage temperature and humidity | -40~105℃, 5%~95% (no condensation) | |
Ground terminal | Support | |
Difference Parameters | Number of expansion paths | E810-R12: 2-way RS-485 |
E810-R14: 4-way RS-485 | ||
E810-R18: 8-way RS-485 | ||
Product dimensions | E810-R12:100×54×32mm | |
E810-R14:120×72×34mm | ||
E810-R18:120×72×34mm | ||
Product weight | E810-R12:70±5g | |
E810-R14:120±5g | ||
E810-R18:120±5g | ||
Interface standards | E810-R12: 5.08mm copper pin plug-in terminal | |
E810-R14: 5.08mm plug-in terminal | ||
E810-R18: 3.81mm plug-in terminal |