E18-MS1PA2-PCB PA LNA low cost zigbee wireless module AD HOC net zigbee relay module for wireless remote control
[IC]：CC2530
[Frequency]：2.4~2.48GHz
[Power]：20dBm
[Distance]：800m
[Size]：16*27.0mm
[Weight]：1.8±0.1g
[Introduction]：E18-MS1PA2-PCB is small-sized 2.4GHz ZigBee wireless module, which is designed and produced by Chengdu Ebyte. SMD type with pcb antenna, with a transmission power of 100mW and the pin pitch is 1.27mm. It is applicable for various applications (especially smart home).
- Specification
- Parameters
- Pin Definition
- Order Way
- File Downloads
- Video Tutoria
-
Series Products
Main Parameters Value Remarks Min. Typical Max Operating voltage（V） 2.0 3.3 3.6 ≥3.3 V ensures output power Communication level（V） - 3.3 - For 5V TTL, it may be at risk of burning down Operating temperature（℃） -40 - 85 Industrial design Operating frequency（MHz） 2.400 - 2.480 ISM band TX Current(mA) - 98 - Instant power consumption RX current（mA） - 36 - - Sleep current（μA） - 2 - Shut down by software Max Tx power（dBm） 19.6 20 20.5 - Receiving sensitivity（dBm） -99 -98 -97 Air data rate is 250 kbps Main parameter Description Remarks Reference distance 800m Test condition: clear and open area, antennna gain: 5dBi,antenna height: 2.5m, aur data rate: 250kbps Protocol ZigBee - Communication interface I/O All IO ports lead out Package SMD - Interface 1.27mm - IC CC2530F256RHAT/QFN40 Built-in PA+LNA FLASH 256KB - RAM 8KB - Core 8051 - Size 16*27mm - Antenna PCB 50 ohm impedance
