ZigBee Module

According to overseas electronic component purchasing guides, for DIY, prototyping, and IoT projects, EBYTE Zigbee modules, starting at $6.30 with complete CE/FCC/RoHS certifications, have become a representative cost-effective RF module in the North American market.

For Zigbee 802.15.4 and Mesh networking scenarios, EBYTE’s E18 series Zigbee modules support a communication distance of up to 2.5km, covering smart home, industrial nodes, long-distance wireless transmission, and various other applications.
Compared with overseas Zigbee solutions such as Digi XBee and Seeed, EBYTE relies on automated SMT production lines and a 4,000-square-meter large-scale factory to provide users with more favorable procurement costs under equivalent RF performance.
North American IoT hardware selection guidelines clearly state that datasheets and certifications should be prioritized for Zigbee modules. All EBYTE modules come with complete datasheets and can stably adapt to mainstream ecosystems such as Zigbee2MQTT and Home Assistant.
From wireless data transmission to industrial-grade Mesh ad-hoc networking, EBYTE Zigbee modules, with reliable performance and affordable pricing, have become a preferred alternative to mid-to-high-end overseas modules, especially suitable for bulk and commercial projects.

Ebyte Buy E18-MS1-PCB TI Preis CC2530 chip 2.4GHz igBee RF Module Smart home Antomation

$4.71

E18-MS1-PCB is based on original imported RF chip CC2530 form TI in American. The IC chip is integrated with 8051 microcontroller and wireless transceiver inside, which is applicable to Zigbee...

Quick viewQuick view Add to cartAdd to cart

EBYTE E180-Z6907A Zigbee 3.0 TLSR8269 Wireless Date Transmission Module Low Power Consumption 2.4GHz Touch Link Smart 7dBm Module

$1.71

E180-Z6907A is a small-sized, low power consumption, high reliability, ZIGBEE module operating in the 2.4GHz frequency band based on TELINK TLSR8269 wireless SOC, which is designed and produced by Chengdu...

Quick viewQuick view Add to cartAdd to cart

EBYTE E75-2G4M10S JN5169 2.4GHz ZigBee Wireless Transceiver Module Networking Smart Home IoT Board PCB IPEX

$6.65

E75-2G4M10S designed by Chengdu Ebyte is a high-performance and low-consumption ZigBee wireless transceiver module, which is based on NXP JN5169. It provides a complete application integration scheme at ISM(2.4-2.5GHz) based...

Quick viewQuick view Add to cartAdd to cart

Ebyte E180-ZG120A EFR32 Zigbee3.0 Wireless Module SoC 2.4GHz Long Range Data Transceiver Zigbee Touch Link For Smart Home System

$6.99 – $8.50

A small, low-power, high-reliability, 2.4GHz ZIGBEE module based on Silicon Labs EFR32MG1B,which are designed and produced by Chengdu Ebyte. The chip comes with high-performance 32-bit ARM Cortex. -M4 core, integrated...

Quick viewQuick view Quick ShopQuick Shop

EBYTE E180-Z5812SP TLSR8258 ZIGBEE 3.0 Module 2.4Ghz Wireless Transceiver Receiver 12dBm 200m High Performance Stamp Hole PCB

$2.62

This high-performance EBYTE TLSR8258 ZIGBEE 3.0 Module is designed for wireless connectivity up to 200m. Featuring a 32-bit high-performance MCU up to 48mhz, and 12dBm maximum transmission power with a...

Quick viewQuick view Add to cartAdd to cart

Ebyte E180-Z5812SX Zigbee 3.0 TLSR8258 2.4GHz Module 12dBm 500m Stamp Hole SMD PCB

$2.84 – $4.24

The Ebyte E180-Z5812SX is an industrial-grade Zigbee 3.0 wireless transceiver module powered by the Telink TLSR8258F512ET32 SoC, integrating a 32-bit MCU @ 48 MHz, 512 KB Flash, and 64 KB...

Quick viewQuick view Quick ShopQuick Shop

EBYTE E18-2G4Z27SP TI CC2530 chip ZigBee Ad Hoc Mesh Network Wireless Module 2.4GHz 27dBm PA+LNA SMD PCB Zigbee Module For Smart Home

$8.14

E18-2G4Z27SP is a small size 2.4GHz ZigBee wireless module designed and produced by Ebyte, SMD, PCB on-board antenna, transmission power 500mW, pin spacing 1.27mm,suitable for a variety of application scenarios...

Quick viewQuick view Add to cartAdd to cart