Ebyte Lightweight IoT Antenna Series | FPC, PCB & Rubber Antennas – Tagged "3.0dBi" – Ebyte Official Store - IoT Module Manufacturer

Lightweight Antenna

Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.

1. Lightweight IoT Antenna Series - Sub-Product Line Filter

Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.

Sub-Series Code Antenna Type Form Factor & Material Installation / Interface Best Application Scenarios
FPC Flexible Printed Circuit Ultra-thin, bendable, lightweight tape IPEX-1 / IPEX-3 / IPX Internal mounting on curved surfaces, compact smart home devices.
PCB Printed Circuit Board Rigid board, compact size IPEX / SMA-J Internal flat mounting, routers, gateways requiring stable structural gain.
TH Spring Antenna Coiled copper spring, highly compact PCB Solder (Through-hole) Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks).
JK / JKD Rubber / Foldable Antenna TPEE material, straight or 90-degree foldable SMA-J (Male thread, inner pin) External cabinet mounting, modems, adaptable signal orientation.
JZ / JZG Glue Stick / Rubber Rod Straight, sturdy cylinder shape SMA-J Standard external communication modules, durable outdoor/industrial use.
JW Elbow Rubber Antenna Fixed 90-degree right angle SMA-J Wall-mounted terminals where straight antennas take up too much vertical space.
JZLW Screw Fixed Rubber Rod High gain, screw-fixed base IPEX-1 to external rod Equipment cabinets, logistic fleets, property security bases.

2. Model Selection by Parameters (Frequency & Form Factor)

Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.

Frequency Band Recommended FPC/PCB (Internal) Recommended Rubber (External) Recommended Spring (Solder)
170MHz / 230MHz (VHF) - TX170-JKD-20, TX230-JK-11 -
433MHz (UHF, LoRa) TX433-FPC-5711, TX433-PCB-3207 TX433-JZ-5, TX433-JKD-20, TX433-JW-5 TX433-TH-3, SW433-TH32DN
868MHz / 915MHz (LoRaWAN) TX915-FPC-4510 TX868-JZ-5, TX915-JK-11, TX868-JZLW-15 -
2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee) TX2400-FPC-2509, TX2400-PCB-4811 TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3 -
LTE / GSM / NB-IoT (Cellular) TX4G-FPC-4015, TX4G-PCB-125014 TXGN-JKD-20, TXGN-JW-5 -

3. Quick Selection Guide

  • Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
  • Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
  • Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
  • Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.

4. Frequently Asked Questions (FAQ)

Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?

A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.

Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?

A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.

Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?

A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.

Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?

A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.

TX868-JKD-20 vertical high gain 868MHz rubber antena 3 portugal 3.0

$1.69

Ebyte's Antenna has the industry’s broadest selection of antennas for a wide variety of applications. They work well for common applications that need good performance as well as a relatively...

TX433-JKD-20 433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna

$0.99

433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna [Gain]:3.0dBi [Interface]:SMA-J [Standing wave (SWR)]: ≤1.5 [Frequency]: 400~470MHz [Resistance]:50Ω [Feature]:vertical high gain antenna [Weight]:21±1g [Introduction]:TX433-JKD-20 is a 433MHz bendable rubber antenna....

EBYTE TX868-JZLW-15 868MHz Antenna 3dBi Rubber Rod IPEX-1 High Gain for Equipment Cabinet Logistic Fleet Property Security

$1.55

[Product weight]:20g [Gain]:3.0dBi [Interface]:IPEX-1 [Standing wave (SWR)]:≤1.5 [Frequency]:868MHz [Resistance]:50Ω [Introduction]:TX868-JZLW-15 is a rubber antenna with 868Mhz frequency band, antenna size is about 165mm, IPEX-1 generation interface, suitable for 868Mhz frequency...

Ebyte TX2400-PCB-4811 2.4G/5.8G Wifi Antenna PCB Antenna Series SMA-J 5dBi Small Size Rubber Antenna For Wireless Module For Ruter

$0.33 – $0.43

Ebyte TX2400-PCB-4811 high gain lte 4g omni wifi network antenna 2.4GHz PCB flexible internal antenna for wireless&IOT device [Gain]: 3.0dBi [Interface]: IPEX [Standing wave (SWR)]: ≤1.5 [Frequency]: 2.4GHz [Resistance]: 50Ω [Feature]:vertical high gain antenna [Introduction]:Ebyte's...

433MHz Rubber Antenna 3dBi IPEX-1 High Gain Screw Fixed Easy to Install 20W Taxi Teams Related Equipment TX433-JZLW-15

$1.99

3dBi high gain antenna,433Mhz frequency band [Product weight]:20g [Gain]:3.0dBi [Interface]: IPEX-1 [Standing wave (SWR)]:≤1.5 [Resistance]:50Ω [Frequency]: 433MHz [Introduction]:TX433-JZLW-15 is a rubber plastic cabinet antenna with 433Mhz frequency band, antenna size is about...

170MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 3.0dBi Gain High-quality Omnidirectional Antenna TX170-JKD-20

$1.99

Brand Name:CDEBYTE Gain(dB):3.0dBi Origin:Mainland China Omni Glue Stick Antenna flexible Folding indoor wifi router 170Mhz Antenna [Frequency]:170M [Interface]:SMA-J [Resistance]:50Ω [Gain]:3.0dBi [Standing wave (SWR)]:≤1.5 [Introduction]:Rubber antenna

433MHz Rubber Antenna SMA-J 3.0dBi Omnidirectional Wifi Antenna TX433-JZ-10

$1.49

lora module iot solutions rf transmitter and receiver high gain antenna 433Mhz straight rubber antenna [Gain]:3.0dBi [Interface]:SMA-J [Standing wave (SWR)]: ≤1.5 [Frequency]:400~470MHz [Resistance]: 50Ω [Feature]:vertical high gain antenna [Weight]:11±1g [Introduction]:TX433-JZ-10 is a...

915MHz Antenna Rubber Rod IPEX-1 High Gain 3dBi for Equipment Cabinet Logistic Fleet Property Security Taxi Fleet TX915-JZLW-15

$1.99

915MHz Rubber Antenna IPEX-1 Connector 3dBi Gain [Product weight]:20g [Gain]:3.0dBi [Interface]:IPEX-1 [Standing wave (SWR)]:≤1.5 [Frequency]:915MHz [Resistance]:50Ω [Introduction]:TX915-JZLW-15 is a rubber antenna with 915Mhz frequency band, antenna size is about 165mm,...

Ebyte TXGN-PCB-3508 4G PCB Antenna CDEBYTE Build-in Antenna Support WCDMA/LET/DTU/4G/5G 826~960 MHz 1710~2170 MHz IPEX Interface

$0.88 – $0.99

Ebyte 3dBi high gain NB/GSM PCB built-in antenna [Frequency]:824~960;1710~2170MHz [Interface]:IPEX-1 [Resistance]:50Ω [Gain]:3.0dBi [Standing wave (SWR)]:≤1.5 [Introduction]:PCB antenna

230MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 3.0dBi Gain High-Quality Omnidirectional Antenna TX230-JKD-20

$1.99

high gain 3.0dBi Flexible 230MHz Omni Directional Wireless Module And Device Communication Antenna [Frequency]:230M [Interface]:SMA-J [Resistance]:50Ω [Gain]:3.0dBi [Standing wave (SWR)]:≤1.5 [Introduction]:TX230-JKD-20 230MHz dedicated antenna, after professional testing by our company,...

490MHz Antenna 3dBi Rubber Rod IPEX-1 High Gain for Equipment Cabinet Logistic Fleet Property Security Taxi Fleet TX490-JZLW-15

$1.99

490Mhz Rubber Plastic Cabinet Antenna IPEX-1 Interface , 3dBi Gain [Gain]: 3dBi [Interface]:IPEX-1 [Standing wave (SWR)]:≤1.5 [Frequency]:490MHz [Resistance]:50Ω [Introduction]:TX490-JZLW-15 is a rubber plastic cabinet antenna with 490Mhz frequency band, antenna size...

FREE SHIPPING

Free shipping on orders over $89.99.

SUPPORT 24/7

Contact on weekdays: ebyteiot@cdebyte.com.

30 DAYS RETURN

Simply return it within 30 days for an exchange.

100% PAYMENT SECURE

We ensure secure payment.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order NoteEdit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

10%OFF Code: ebyteiot ,Available for any order ,Coupon code will work on checkout page