E18-2G4Z27SP is a small size 2.4GHz ZigBee wireless module designed and produced by Ebyte, SMD, PCB on-board antenna, transmission power 500mW, pin spacing 1.27mm,suitable for a variety of application scenarios (especially smart Home). Ideal for smart home applications, E18-2G4Z27SP packs 500mW of RF transmission power into a small form factor, ensuring reliable data transfer over a 2.4GHz operating frequency that's easy to integrate.
Brand Name:EBYTE
Origin:Mainland China
Weight: 1.59g
Condition:New
Type:Drive IC
Model Number:E18-2G4Z27SP
Type:ZigBee Network Wireless Module
| Main parameter | Min. | Typ. | Max. | Unit | Remark |
| Operating voltage |
2.5 | 3.3 | 3.6 | V | ≥3.3V ensures output power |
| Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
| TX current | - | 500 | - | mA | Instantaneous power consumption @27dBm |
| RX current | - | 36 | - | mA |
- |
| Sleep current | - | 2.5 | - | uA | Software is shut down |
| Operating temperature |
-40 | - |
+85 | ℃ | Industrial design |
| Operating frequency |
2.400 | - | 2.480 | GHz | Support ISM band |
| Max TX power | 26.8 | 27 | 27.4 | dBm | - |
| Receiving sensitivity | -98 | -99 | -100 | dBm | Air data rate is 250kBps |
| Main parameter | Performance |
Remark |
| Distance for reference |
1600m | PCB on board antenna |
| Protocol supported |
ZigBee |
- |
| Communication interface |
I/O |
All IO ports lead |
| Packaging |
SMD |
- |
| Connector |
1.27mm |
- |
| IC |
CC2530F256RHAT/QFN40 |
Built-in PA+LNA |
| FLASH |
256kB | - |
| RAM |
8kB |
- |
| Core |
8051 |
- |
| Size |
16*27.0mm |
- |
| Antenna |
PCB on board antenna |
Equivalent impedance is about 50Ω |
Module network distribution & identification in HEX command mode
Zigbee3.0 Module Three Types of Serial Mode Switch
Instructions for E18 series firmware update
HEX command standard specification_EN
E18_ZigBee3.0_Software_Datasheet
E18_Software_Datasheet_EN_old version v1.2
【RF_Setting】Zigbee_3.0
E18 _firmware _old version
Xcom

