[Processor model]:MCIMX6Y2CVM08AB
[Processor frequency]: 792MHz
[Memory capacity]:256MB
[Product size]:38*38*3mm
[Introduction]:Ebyte ECK20-6Y2XA series core board is based on NXP Cortex-A7 core i.MX6ULL processor, using stamp hole connection to connect low-cost, low-power, cost-effective, high-reliability embedded core board. Widely used in industrial control, HMI, IoT and other fields. The processor uses a single ARM Cortex-A7 core with a maximum main frequency of 792MHz, which can provide 1 LCD display, 1 digital camera, Two 10/100 Ethernet, 2 USB OTG, 8 UART, 2 SDIO, 2 CAN, multiple GPIO and other rich I/O resources.
Product | Function description | |
processor | MCIMX6Y2CVM08AB; | |
i.MX 6ULL Applications Processors for Industrial; | ||
Single Arm Cortex-A7 core, 792MHz; | ||
storage | Memory | On-board DDR3L SDRAM, 16-bit wide, 256MB/512MB optional; |
FLASH | On-board 8GB eMMC / On-board 512MB parallel NAND FLASH optional; | |
show | 1 parallel display interface, maximum resolution supports WXGA (1366×768@60fps); | |
Supports 24bit, 18bit, 16bit, and 8bit parallel display output; | ||
Camera | 1 parallel camera interface, supporting up to 24bit data and 85MHz clock; | |
Support 24bit, 16bit, 10bit, 8bit data input; | ||
Support BT.656 data format; | ||
USDHC | 2-way MMC/SD/SDIO card interface; | |
1bit or 4bit mode SD/SDIO card, supporting UHS-I SDR-104 mode at most; | ||
1bit, 4bit or 8-bit mode MMC card, maximum support for DDR mode; | ||
4bit or 8-bit mode eMMC, supports up to HS200 mode; | ||
USB | 2-way USB 2.0 OTG; | |
Audio | 3 channels I2S/SAI/AC97, maximum 1.4Mbps per channel; | |
Support ESAI audio interface; | ||
Support SPDIF audio interface; | ||
serial port | 8-channel UART, maximum 5Mbps per channel; | |
SPI | 4 channels of eCSPI (Enhanced CSPI), maximum 52Mbps per channel; | |
Ethernet | 2-way 10/100 Ethernet MAC, supports IEEE1588, supports RMII; | |
I2C | 4 channels of I2C, maximum 400Kbps per channel; | |
CAN | 2-way CAN interface, supporting CAN 2.0B protocol; | |
PWM | 8-channel PWM, maximum clock frequency 66MHz; | |
ADC | 2 12-bit ADCs, supporting up to 10 input channels; | |
EIM | Supports EIM (External Interface Module), which can be expanded to NOR FLASH or PSRAM, etc.; | |
JTAG | Support System JTAG Controller; | |
TIMER | 2 GPT (General Purpose Timer) timer functions; | |
WDT | 3 Watchdog timer functions; | |
keyboard | 1 8×8 matrix keyboard function; | |
GPIO | 105 (maximum) GPIO channels, supporting interrupt function; |