The Ebyte EBT642-B / EBT742-PG family is an industrial embedded computing platform built on the Rockchip RK3506J with a triple-core ARM Cortex-A7 at up to 1.2GHz plus a Cortex-M0 MCU: the EBT642-B2N2I and EBT642-B5N5I are 29 x 25 x 3.1 mm 140-pin LGA core boards in 8-layer PCB, tape-and-reel packaged for SMT production, with 256MB or 512MB DDR3 and matching SPI NAND; the EBT742-PGB5N5I mounts the B5N5I core board on an 85 x 56 mm industrial carrier board exposing dual 10/100M RJ45 Ethernet, Type-C 5V power, 2-lane MIPI-DSI display output, USB host and OTG, TF slot and a Raspberry Pi-style 2x20 header with 28 GPIO; and the ECA11-5LM0712C is a 5.5-inch 720 x 1280 five-point capacitive MIPI touchscreen module on a 26-pin 0.5mm FPC for complete industrial HMI builds.
Key Features & Advantages
- Heterogeneous RK3506J Compute: three ARM Cortex-A7 cores run Linux up to 1.2GHz while the on-chip Cortex-M0 MCU handles time-critical background tasks. That split is why this family suits industrial control: your HMI or gateway logic runs on Linux, and bit-banging, watchdog or fieldbus timing that must not jitter can live on the M0 instead of fighting the Linux scheduler.
- Industrial Peripheral Set On-Chip: 2x CAN 2.0B controllers, 6x UART up to 4Mbps, 3x SPI, 3x I2C, 12x PWM, 4x 10-bit SARADC at 1MS/s, 2x 10/100M Ethernet MACs with RMII and 80 GPIO with interrupt inputs. CAN on-die plus two independent Ethernet MACs is the specification that separates an industrial SoM from a consumer board.
- Complete Display Chain Options: 1x 2-lane MIPI-DSI at 1.5Gbps per lane up to 1280x1280@60fps, plus RGB parallel and BT.656/BT.1120 outputs. The family covers panels from small resistive TFTs to this 5.5-inch 720x1280 MIPI capacitive touchscreen without an external bridge chip.
- Core-Board Form Factor Built For Mass Production: the 140-pin LGA, 29 x 25 x 3.1 mm, 8-layer module is supplied tape-and-reel, so it goes straight onto your SMT line like a component, not onto a prototyping shield stack. Power rails are broken out both ways: the module accepts DC 5V@1A, 3.3V@500mA and 1.8V@100mA and also outputs 3.3V@500mA / 1.8V@100mA for carrier design headroom.
- EBT742-PGB5N5I: Production-Grade SBC, Not A Dev Board: the carrier board exposes dual RJ45 10/100M Ethernet, USB 2.0 host, Type-C OTG/power, debug UART on Type-C, TF slot with insertion detection, PH2.0 audio input, RESET/RECOVER/MASKROM buttons and a 2.54mm 2x20 RPI-compatible header carrying 28 GPIO multiplexed with SPI, I2S, 2x I2C, 3x UART and 2x CAN. Ebyte publishes the carrier schematic, footprint and PCB design files as open references, and the SDK ships Linux kernel 6.1.99, u-boot 2017.09, Buildroot 2024.02 and Yocto 5.0.3 support.
- Industrial Temperature Range: the core board and SBC are rated -40 to +85C operating (with adequate thermal design) and -40 to +125C storage at 5-95% RH non-condensing. The ECA11 touchscreen is a commercial-class panel rated -10 to +70C - plan the display glass accordingly.
Core Specifications
Compiled from the official EBT642-B2N2I (page 3090), EBT642-B5N5I (page 3091), EBT742-PGB5N5I (page 3092) and ECA11-5LM (page 2567) parameter tables. Cells marked [to be confirmed] are not resolved per model in the published tables and must be checked against the datasheet or product manual before design-in. Note: the official series-comparison widget on these pages contains a "RK3562J" label that contradicts every spec table on the same pages, which consistently describe the RK3506J triple-core Cortex-A7 part; the spec tables are used here.
| Category | Item | EBT642-B (B2N2I / B5N5I core board) | EBT742-PGB5N5I single board computer | ECA11-5LM0712C touchscreen |
|---|---|---|---|---|
| SoC | Processor | Rockchip RK3506J: triple-core Cortex-A7 up to 1.2GHz + Cortex-M0 MCU | Same, via on-board EBT642-B5N5I core board (SMT-soldered) | Not applicable - display module |
| Memory | RAM / Flash | 256MB or 512MB DDR3; 256MB or 512MB SPI NAND - series table; per-model split by order code B2N2I vs B5N5I is [to be confirmed] against the manual | B5N5I configuration (512MB-class per naming, [to be confirmed]) | Not applicable |
| Display | Interfaces | 1x 2-lane MIPI-DSI 1.5Gbps/lane, RGB parallel, BT.656/BT.1120; max 1280x1280@60fps | 1x 2-lane MIPI-DSI connector, up to 1280x1280@60fps | 5.5-inch, 720x1280, FPC exposes 4 MIPI data pairs + clock (panel-side capability; host lane count differs - see FAQ) |
| Touch | Controller signals | Not applicable | Not applicable | 5-point capacitive; CT_INT / CT_SCL / CT_SDA / CT_RST (I2C + reset + IRQ, 3.3V), LCD_BL backlight, LCD_ID, MIPI_RESET on 26-pin 0.5mm FPC |
| Networking | Ethernet | 2x MAC, 10/100Mbps with RMII - carrier needs external PHY chips | 2x 10/100M RJ45 ports, auto-negotiation (PHYs on carrier) | Not applicable |
| USB | Controllers / connectors | 2x USB 2.0 OTG (signal level, on LGA) | 1x USB 2.0 host Type-A; 1x USB 2.0 OTG Type-C shared with power input, slave mode | Not applicable |
| Industrial I/O | On-chip | 2x CAN 2.0B, 6x UART (to 4Mbps), 3x SPI, 3x I2C, 12x PWM, 4x SARADC 10-bit 1MS/s, eMMC/SD3.0/SDIO3.0, DSMC master+slave, FLEXBUS, 80 GPIO | Via 2.54mm 2x20 RPI header: 28 GPIO multiplexed with 1x SPI, 1x I2S, 2x I2C, 3x UART, 2x CAN; 3.3V and 5V outputs | Power 5V on FPC pins 1-2 |
| Audio | Capabilities | 5x SAI (I2S/PCM/TDM), SPDIF TX+RX to 192kHz, PDM for up to 8 microphones, 2-ch DAC, 24-bit ADC mic input | 1x ACODEC_ADC_IN audio input on 4-pin PH2.0 | Not applicable |
| Power | Supply | DC +5V@1A, +3.3V@500mA, +1.8V@100mA in; 3.3V@500mA / 1.8V@100mA out; header states DC +5V plus or minus 10% | DC +5V plus or minus 10% @ 2A via Type-C | 5V on FPC; 3.3V logic on touch signals |
| Environment | Temperature / humidity | Operating -40 to +85C; storage -40 to +125C; 5-95% RH non-condensing | Wide-temp grade -40 to +85C with good heat dissipation; same storage/humidity | Operating -10 to +70C (series table) |
| Mechanical | Size / package / weight | 29 x 25 x 3.1 mm, 140-pin LGA, 8-layer PCB, tape-and-reel; module 5.1 g | Carrier board 85 x 56 mm; ship weight per seller data 38 g | 135 x 77 x 12 mm; official page weight 105 g, ship weight per seller data 218 g |
| Software | SDK / OS support | RK3506 SDK: kernel 6.1.99, u-boot 2017.09, Buildroot 2024.02, Yocto 5.0.3, RKDevTool flashing tool, full driver tree published | Same SDK with board support; evaluation images provided | Example routines supplied for the matching SBC platforms |
| Use restriction | Manufacturer statement | Not for military or life-safety applications | Not for military or life-safety applications | Not for military or life-safety applications |
Product Selection Guide
Notice for Selection: This is a wired embedded computing family - there is no radio, no ISM band and no antenna question here. There are three hard checks before ordering. First, the core boards are 140-pin LGA modules meant for reflow soldering onto your own PCB: if you do not have an SMT line, buy the EBT742-PGB5N5I single board computer instead. Second, the exact memory split of the B2N2I vs B5N5I order codes is not spelled out per model in the public tables - confirm 256MB vs 512MB DDR3 and SPI NAND against the product manual before you size a product. Third, the ECA11-5LM0712C touchscreen is specified by Ebyte for direct connection to the ECB30 / ECB31 / ECB32 single board computers over its 26-pin FPC; pairing it with other boards requires matching MIPI-DSI lane count, connector and driver support - verify first. Manufacturer statement: these products must not be used in military or life-safety applications.
| Your situation | Recommended model | Why |
|---|---|---|
| Designing your own board for volume production | EBT642-B2N2I | Tape-and-reel LGA module for SMT; 256MB-class config suits lean Linux/Buildroot loads (confirm per manual) |
| Your product runs heavier UI, browser or container stacks | EBT642-B5N5I | Same footprint and pinout, 512MB-class memory (confirm per manual) - upgrade path without PCB respin |
| Need a working Linux board now, or small-batch industrial units | EBT742-PGB5N5I | Industrial-grade carrier with dual RJ45, Type-C power, TF, RPI header; carrier design files published as open reference |
| Building an HMI panel and want a tested display | ECA11-5LM0712C | 5.5-inch 720x1280 5-point capacitive module with example routines for the matching Ebyte SBC platforms |
| Need 1080p-class on the same 5.5-inch frame | ECA11-5LM1019C | Same series, 1080x1920 resolution - listed for cross-checking only, sold separately |
















Industrial Installation & Wiring
1. Core board is an SMT component, not a socket part: the 140-pin LGA EBT642-B is placed and reflow-soldered onto your carrier like a large BGA-class device, and the tape-and-reel packaging is exactly what your pick-and-place feeder expects. Design your carrier footprint from the published EBT642-B mechanical and pin-list files; do not attempt hand soldering - LGA coplanarity failures are the classic source of intermittent DDR3 training faults.
2. Power delivery: the module wants DC +5V at 1A as its main rail (the carrier may also inject 3.3V/1.8V rails per the pin table), with 3.3V@500mA and 1.8V@100mA available as outputs for your peripherals. The header rating sheet says +5V plus/minus 10 percent; a USB 2A-class supply with proper decoupling at the module edge keeps DDR3 and the MIPI PHYs clean.
3. Ethernet needs PHYs on your carrier: the RK3506J exposes 2x 10/100M MACs at RMII level only - your board adds the PHY transceivers and magnetics or RJ45-with-integrated-magnetics. The EBT742-PGB5N5I has already done this twice over with two RJ45 ports, which is the fastest way to validate your software before committing to a carrier spin.
4. MIPI-DSI layout: DSI pairs are 1.8V-level controlled-impedance differential lanes (nominally 100 ohm differential - verify against the EBT642-B hardware design guide). Keep lane-length matched, reference them continuously, and never route them across the switching edge of the DC-DC that feeds the board.
5. Touchscreen FPC handling: the ECA11-5LM0712C plugs in over a 26-pin 0.5mm-pitch same-direction FPC. Pins 1-2 carry 5V panel power, the CT_INT / CT_SCL / CT_SDA / CT_RST group is a standard capacitive-touch I2C plus reset and interrupt set at 3.3V, and LCD_BL drives the backlight (drive it from a PWM-capable GPIO for brightness control). Observe ESD discipline when handling bare FPC - MIPI panels fail from ESD silently, weeks later.
6. Thermals: the module is rated to +85C, but the SBC rating explicitly says "with adequate heat dissipation". Give the metal can breathing room or a thermal path to the enclosure, especially inside a sealed HMI front panel where the display itself adds heat.
7. Bring-up: the board exposes RESET, RECOVER and MASKROM buttons - MASKROM holds the SoC in download mode so RKDevTool can flash over USB Type-C (the same port carries power). The debug UART is on its own Type-C connector, so early kernel issues have a serial console out of the box.
Practical Application Scenarios
1. Machine-Building HMI Panels
The EBT742-PGB5N5I plus the 5.5-inch ECA11 capacitive touchscreen makes a complete Linux HMI: the RPI header's 2 CAN buses talk to the machine's CANopen or J1939 islands, the 3 breadboard-friendly UARTs reach legacy PLC ports, and dual 10/100M Ethernet lets you keep the cell network and the office network physically separate on one board.
2. Industrial IoT Gateways And Protocol Hubs
Two independent Ethernet MACs, six UARTs and on-chip CAN give a gateway real topology options: serial device fleets in through UART/RS conversion, fieldbus in through CAN, northbound out over two separated network zones. The Cortex-M0 can run the deterministic polling while Linux handles MQTT, buffering and OTA on the A7 side.
3. Self-Service Kiosks And Commercial Terminals
The manufacturer positions this family at self-service terminals and electronic commercial equipment: a 5.5-inch bright capacitive panel, USB host for payment or barcode peripherals, TF slot for local media, and an LGA core that a kiosk OEM drops into its own carrier in volume production instead of paying for a full custom board.
4. Edge Control In Existing 1.2GHz Power Budgets
Where a PC/104 or Raspberry CM4-class board is oversized, a triple-A7 + M0 at 1.2GHz running Buildroot covers supervisory logic, display UI and protocol handling at a fraction of the power and board area - and the -40..+85C rating is what makes it usable in an un-airconditioned street cabinet rather than only in a server room.
FAQ Section
Q1: What exactly is the difference between the EBT642-B2N2I and the B5N5I?
The SoC, package, pinout and peripheral set are identical - both are the RK3506J on the same 29 x 25 x 3.1 mm, 140-pin LGA, 8-layer module. The order-code digits point at the memory population: the series parameter table states 256MB or 512MB DDR3 and 256MB or 512MB SPI NAND, and the naming convention indicates B2N2I is the 256MB class while B5N5I is the 512MB class, but the official per-model pages do not spell that split out, so confirm it against the product manual before you size a product's memory. Electrically they are interchangeable on the same carrier footprint.
Q2: Should I buy the EBT642 core board or the EBT742 single board computer?
Buy the EBT742-PGB5N5I when you need a working machine this week or your volumes are too small to justify a carrier: it already solves the dual Ethernet PHYs, power tree, Type-C flashing, MIPI connector and RPI-compatible expansion, and it is explicitly designed above hobby dev-board level, so small production runs are legitimate use. Buy the EBT642-B core board when you have (or are designing) your own product PCB: the module drops onto your layout as an SMT component from tape-and-reel, and everything you do not need - extra connectors, extra PHYs - disappears from your BOM.
Q3: Will the ECA11-5LM0712C touchscreen plug straight into the EBT742-PGB5N5I?
Not stated as a validated pair by the manufacturer, so treat it as a design task rather than a guaranteed combo. The screen is specified for direct connection to the ECB30 / ECB31 / ECB32 single board computers over its 26-pin 0.5mm FPC, and its touch group needs four 3.3V GPIOs (I2C plus reset and interrupt) and a backlight drive from the host board. The panel FPC exposes four MIPI data pairs while the RK3506J DSI output is 2-lane, so lane mapping and the initialization sequence for your specific host must be confirmed from the screen manual and SDK examples before ordering the combination.
Q4: What software stack do I actually get?
A published RK3506 SDK: Linux kernel 6.1.99, u-boot 2017.09, Buildroot 2024.02 and Yocto 5.0.3 BSPs, RKDevTool for USB flashing, plus a driver tree that names every on-chip block - codec, thermal, FSM SPI, MMC, PWM, PM, SARADC, USB PHY, GMAC, DRM display, DSI, I2C, UART, CAN and DSMC - with source paths. Ebyte additionally ships evaluation images, software development guides, hardware reference designs, footprints and mechanical files, so the bring-up path is documented rather than reverse-engineered.