The EBYTE E18-MS1PA2-PCB is a 2.4GHz ZigBee wireless module with a maximum transmission power of 100mW. The small size and 1.27mm pin pitch make it ideal for smart home applications, up to 800m of AD HOC network coverage.
Brand Name:EBYTE
Origin:Mainland China
Condition:New
Type:Drive IC
Model Number:E18-MS1PA2-PCB
Supply Voltage:2.0-3.6V
Dissipation Power:20dBm
is_customized:Yes
Package:SMD
Reference distance:800m
Protocol:ZigBee
Interface:1.27mm
Size:16*27mm
Antenna:PCB
Keywords:ZigBee CC2530
Main Parameters | Value | Remarks | ||
Min. | Typical | Max | ||
Operating voltage(V) | 2.0 | 3.3 | 3.6 | ≥3.3 V ensures output power |
Communication level(V) | - | 3.3 | - | For 5V TTL, it may be at risk of burning down |
Operating temperature(℃) | -40 | - | 85 | Industrial design |
Operating frequency(MHz) | 2.400 | - | 2.480 | ISM band |
TX Current(mA) | - | 98 | - | Instant power consumption |
RX current(mA) | - | 36 | - | - |
Sleep current(μA) | - | 2 | - | Shut down by software |
Max Tx power(dBm) | 19.6 | 20 | 20.5 | - |
Receiving sensitivity(dBm) | -99 | -98 | -97 | Air data rate is 250 kbps |
Main parameter | Description | Remarks |
Reference distance | 800m | Test condition: clear and open area, antennna gain: 5dBi,antenna height: 2.5m, aur data rate: 250kbps |
Protocol | ZigBee | - |
Communication interface | I/O | All IO ports lead out |
Package | SMD | - |
Interface | 1.27mm | - |
IC | CC2530F256RHAT/QFN40 | Built-in PA+LNA |
FLASH | 256KB | - |
RAM | 8KB | - |
Core | 8051 | - |
Size | 16*27mm | - |
Antenna | PCB | 50 ohm impedance |
Module network distribution & identification in HEX command mode
Zigbee3.0 Module Three Types of Serial Mode Switch
Instructions for E18 series firmware update
HEX command standard specification_EN
E18_ZigBee3.0_Software_Datasheet
E18_Software_Datasheet_EN_old version v1.2
【RF_Setting】Zigbee_3.0
E18 _firmware _old version
Xcom
Demo_E18
ConfigureTool_Setting_Ebyte_zigbee_v1.20
PCB_E18