Lightweight Antenna

Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.

1. Lightweight IoT Antenna Series - Sub-Product Line Filter

Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.

Sub-Series Code	Antenna Type	Form Factor & Material	Installation / Interface	Best Application Scenarios
FPC	Flexible Printed Circuit	Ultra-thin, bendable, lightweight tape	IPEX-1 / IPEX-3 / IPX	Internal mounting on curved surfaces, compact smart home devices.
PCB	Printed Circuit Board	Rigid board, compact size	IPEX / SMA-J	Internal flat mounting, routers, gateways requiring stable structural gain.
TH	Spring Antenna	Coiled copper spring, highly compact	PCB Solder (Through-hole)	Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks).
JK / JKD	Rubber / Foldable Antenna	TPEE material, straight or 90-degree foldable	SMA-J (Male thread, inner pin)	External cabinet mounting, modems, adaptable signal orientation.
JZ / JZG	Glue Stick / Rubber Rod	Straight, sturdy cylinder shape	SMA-J	Standard external communication modules, durable outdoor/industrial use.
JW	Elbow Rubber Antenna	Fixed 90-degree right angle	SMA-J	Wall-mounted terminals where straight antennas take up too much vertical space.
JZLW	Screw Fixed Rubber Rod	High gain, screw-fixed base	IPEX-1 to external rod	Equipment cabinets, logistic fleets, property security bases.

2. Model Selection by Parameters (Frequency & Form Factor)

Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.

Frequency Band	Recommended FPC/PCB (Internal)	Recommended Rubber (External)	Recommended Spring (Solder)
170MHz / 230MHz (VHF)	-	TX170-JKD-20, TX230-JK-11	-
433MHz (UHF, LoRa)	TX433-FPC-5711, TX433-PCB-3207	TX433-JZ-5, TX433-JKD-20, TX433-JW-5	TX433-TH-3, SW433-TH32DN
868MHz / 915MHz (LoRaWAN)	TX915-FPC-4510	TX868-JZ-5, TX915-JK-11, TX868-JZLW-15	-
2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee)	TX2400-FPC-2509, TX2400-PCB-4811	TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3	-
LTE / GSM / NB-IoT (Cellular)	TX4G-FPC-4015, TX4G-PCB-125014	TXGN-JKD-20, TXGN-JW-5	-

3. Quick Selection Guide

Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.

4. Frequently Asked Questions (FAQ)

Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?

A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.

Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?

A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.

Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?

A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.

Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?

A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.

EBYTE OEM ODM TX433-FPC-3208 433mhz FPC internal antenna high gain omni antenna fpc manufacturer antenna

$0.55

wireless module antenna iot solutions 433mhz FPC internal antenna high gain omni antenna soft flexibility aerial [Gain]：2.0dBi [Interface]：IPX [Standing wave (SWR)]：≤1.5 [Frequency]：423~443MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：1±0.1g [Introduction]：TX433-FPC-3208 is...

Quick viewQuick view Add to cartAdd to cart

EBYTE TX868-JZLW-15 868MHz Antenna 3dBi Rubber Rod IPEX-1 High Gain for Equipment Cabinet Logistic Fleet Property Security

$1.55

[Product weight]：20g [Gain]：3.0dBi [Interface]：IPEX-1 [Standing wave (SWR)]：≤1.5 [Frequency]：868MHz [Resistance]：50Ω [Introduction]：TX868-JZLW-15 is a rubber antenna with 868Mhz frequency band, antenna size is about 165mm, IPEX-1 generation interface, suitable for 868Mhz frequency...

Quick viewQuick view Add to cartAdd to cart

Ebyte TX915-FPC-4510 915MHz 868MHz 2.0dBi Gain Wifi Antenna Omni Directional Antenna

$0.40

Antenna 868mhz/915mhz 2dbi Flexible Antenna Antena For Communications Wireless Network Equipment [Gain]：2.0dBi [Interface]：IPEX [Standing wave (SWR)]：≤2.0 [Frequency]：868~930MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Introduction]：Ebyte's Antenna has the industry’s broadest selection of...

Quick viewQuick view Add to cartAdd to cart

Ebyte TX2400-PCB-4811 2.4G/5.8G Wifi Antenna PCB Antenna Series SMA-J 5dBi Small Size Rubber Antenna For Wireless Module For Ruter

$0.33 – $0.43

Ebyte TX2400-PCB-4811 high gain lte 4g omni wifi network antenna 2.4GHz PCB flexible internal antenna for wireless&IOT device [Gain]： 3.0dBi [Interface]： IPEX [Standing wave (SWR)]： ≤1.5 [Frequency]： 2.4GHz [Resistance]： 50Ω [Feature]：vertical high gain antenna [Introduction]：Ebyte's...

Quick viewQuick view Quick ShopQuick Shop

Ebyte TX433-FPC-5711 433MHz FPC Wifi Antenna High Gain 2.5dBi Omni Directional Aerial

$0.57

Ebyte TX433-FPC-5711 2.5dBi 433mhz Flexible Antenna Wireless Module Patch Antenna Internal Aerial FPC Antenna with IPX Connector [Frequency]：433MHz [Interface]：IPX 1 Interface [Resistance]：50Ω [Gain]：2.5dBi [Standing wave (SWR)]：≤1.5 [Weight]：1±0.1g [Introduction]：2.5dBi 433mhz Flexible...

Quick viewQuick view Add to cartAdd to cart

Ebyte TXGN-JW-5 Mobile Terminal Communication antena 3.0 GPRS GSM Elbow Gel Stick Antenna 2.5dBi Wireless Hotspot Aerial

$0.69

Ebyte TXGN-JW-5 is an industrial-grade mobile terminal communication elbow glue stick antenna featuring a 2.5dBi high gain and an omnidirectional radiation pattern across NB-IoT, GPRS, and GSM bands. Designed with...

Quick viewQuick view Add to cartAdd to cart

433MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 2.5dBi Gain High-quality Omnidirectional Antenna TX433-JZG-6

$1.08

2.5dBi RF Omni directional Straight Antenna for wireless communication and others [Gain]：2.5dBi [Interface]：SMA-J [Standing wave (SWR)]： ≤1.5 [Frequency]：433MHz [Resistance]：50Ω [Feature]：Straight Antenna [Introduction]：Ebyte's Antenna has the industry’s broadest selection of antennas for...

Quick viewQuick view Add to cartAdd to cart

433MHz Rubber Antenna 3dBi IPEX-1 High Gain Screw Fixed Easy to Install 20W Taxi Teams Related Equipment TX433-JZLW-15

$1.99

3dBi high gain antenna，433Mhz frequency band [Product weight]：20g [Gain]：3.0dBi [Interface]： IPEX-1 [Standing wave (SWR)]：≤1.5 [Resistance]：50Ω [Frequency]： 433MHz [Introduction]：TX433-JZLW-15 is a rubber plastic cabinet antenna with 433Mhz frequency band, antenna size is about...

Quick viewQuick view Add to cartAdd to cart

EBYTE TXWF-FPC3-3710 2.4GHz 5.8 GHz FPC Build-in Antenna IPEX-3 Interface FPC Antenna Series Small Size Light Weight

$0.39 – $0.43

TXWF-FPC3-3710 FPC built-in antenna 2.4/5.8GHz dual-band FPC built-in antenna IPEX-3rd Generation Interface [Type]：FPC built-in antenna [Frequency band]：2.4/5.8GHz [Interface]：IPEX-3 [Impedance]：50Ω [Gain]：2.5dBi [VSWR]： ≤2.0 [weight]： 1g [Introduction]：TXWF-FPC3-3710 is a 2.4/5.8GHz dual-band FPC built-in antenna...

Quick viewQuick view Quick ShopQuick Shop

2.4G Antenna 3dBi Rubber Rod IPEX-1 High Gain for Equipment Cabinet Logistic Fleet Property Security Taxi Fleet TX2400-JZLW-15

$1.99

2.4GHz Rubber Antenna IPEX-1 Connector 5dBi Gain [Gain]： 5dBi [Interface]：IPEX-1 [Standing wave (SWR)]：≤1.5 [Frequency]：2.4~2.5GHz [Resistance]：50Ω [Product weight]：20g [Introduction]：TX2400-JZLW-15 is a rubber antenna with 2.4Ghz frequency band, antenna size is about 165mm,...

Quick viewQuick view Add to cartAdd to cart

TX915-JK-11B New Ebyte 2.5dBi high gain 915MHz Ism band SMA-J rf antenna

$0.99

TX915-JK-11B is an industrial-grade 915MHz ISM band rubber antenna featuring a 2.5dBi gain and a low SWR ≤ 1.5, optimized for reliable long-range LoRa and RF communication with a standard...

Quick viewQuick view Add to cartAdd to cart

TX433-PCB-3207 433mhz PCB internal uhf antenna IPX wireless iot 4g omnidirectional antenna for communication

$0.39

433mhz PCB internal uhf antenna IPX wireless iot 4g omnidirectional antenna for communication [Gain]：2.0dBi [Interface]：IPX [Standing wave (SWR)]：≤1.5 [Frequency]：423~443MHz [Resistance]：50Ω [Feature]：vertical high gain antenna [Weight]：1±0.1g [Introduction]：TX433-PCB-3207 is a 433MHz PCB...

Quick viewQuick view Add to cartAdd to cart