Ebyte Lightweight IoT Antenna Series | FPC, PCB & Rubber Antennas – Tagged "50Ω" – Ebyte Official Store - IoT Module Manufacturer

Lightweight Antenna

Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.

1. Lightweight IoT Antenna Series - Sub-Product Line Filter

Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.

Sub-Series Code Antenna Type Form Factor & Material Installation / Interface Best Application Scenarios
FPC Flexible Printed Circuit Ultra-thin, bendable, lightweight tape IPEX-1 / IPEX-3 / IPX Internal mounting on curved surfaces, compact smart home devices.
PCB Printed Circuit Board Rigid board, compact size IPEX / SMA-J Internal flat mounting, routers, gateways requiring stable structural gain.
TH Spring Antenna Coiled copper spring, highly compact PCB Solder (Through-hole) Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks).
JK / JKD Rubber / Foldable Antenna TPEE material, straight or 90-degree foldable SMA-J (Male thread, inner pin) External cabinet mounting, modems, adaptable signal orientation.
JZ / JZG Glue Stick / Rubber Rod Straight, sturdy cylinder shape SMA-J Standard external communication modules, durable outdoor/industrial use.
JW Elbow Rubber Antenna Fixed 90-degree right angle SMA-J Wall-mounted terminals where straight antennas take up too much vertical space.
JZLW Screw Fixed Rubber Rod High gain, screw-fixed base IPEX-1 to external rod Equipment cabinets, logistic fleets, property security bases.

2. Model Selection by Parameters (Frequency & Form Factor)

Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.

Frequency Band Recommended FPC/PCB (Internal) Recommended Rubber (External) Recommended Spring (Solder)
170MHz / 230MHz (VHF) - TX170-JKD-20, TX230-JK-11 -
433MHz (UHF, LoRa) TX433-FPC-5711, TX433-PCB-3207 TX433-JZ-5, TX433-JKD-20, TX433-JW-5 TX433-TH-3, SW433-TH32DN
868MHz / 915MHz (LoRaWAN) TX915-FPC-4510 TX868-JZ-5, TX915-JK-11, TX868-JZLW-15 -
2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee) TX2400-FPC-2509, TX2400-PCB-4811 TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3 -
LTE / GSM / NB-IoT (Cellular) TX4G-FPC-4015, TX4G-PCB-125014 TXGN-JKD-20, TXGN-JW-5 -

3. Quick Selection Guide

  • Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
  • Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
  • Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
  • Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.

4. Frequently Asked Questions (FAQ)

Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?

A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.

Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?

A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.

Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?

A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.

Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?

A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.

EBYTE TX915-JKD-20 915MHz Rubber Antenna Series Sucker Antenna Foldable SMA-J Interface Cabinet Antenna TPEE Material for Modem

$2.19 – $16.99

TX915-JKD-20 915MHz Lora WIFI Antenna Omnidirectional 3.5dBi SMA-J 20W Long Range Rubber Foldable Antenna For Communication [Gain]:3.5dBi [Interface]:SMA-J [Standing wave (SWR)]:≤2.5 [Frequency]:915M [Resistance]:50Ω [Feature]:Bendable RubberAntenna [Weight]:22g±1g [Introduction]:Bendable RubberAntenna TX915-BLG-26 LoRa...

EBYTE TX868-JZ-5 vertical high gain 868MHz antena for wireless communication and others

$0.82

Ebyte's antena 3 0 has an expansive variety of antennas that excel in a myriad of applications. It's the perfect choice for those seeking a relatively small and reliable antenna...

TX868-JKD-20 vertical high gain 868MHz rubber antena 3 portugal 3.0

$1.69

Ebyte's Antenna has the industry’s broadest selection of antennas for a wide variety of applications. They work well for common applications that need good performance as well as a relatively...

Ebyte TX915-JZ-5 915MHz High Gain Antenna 2.0dBi 915M RF Omnidirectional Antenna Communication

$0.99

TX915-JZ-5 915MHz SMA-J Rubber Antenna The TX915-JZ-5 is a precision-tuned 915MHz omnidirectional rubber antenna with SMA-J connector, optimized for reliable ISM band communication. Key Features Frequency-Specific Design Engineered exclusively for...

Ebyte 2.4GHz UHF VHF 2.4GHz RF Omnidirectional antenas wifi 3.0 precios TX2400-JKD-20

$1.42

TX2400-JKD-20 is a 2.4GHz bendable rubber antenna. and the antenas wifi 3.0 precios 1.07$.  Height of the antenna is 200mm. With a SMA-J connector (SMA inner screw thread and inner...

TX433-JKD-20 433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna

$0.99

433Mhz straight rubber antenna communication 3dBi high gain TPEE waterproof antenna [Gain]:3.0dBi [Interface]:SMA-J [Standing wave (SWR)]: ≤1.5 [Frequency]: 400~470MHz [Resistance]:50Ω [Feature]:vertical high gain antenna [Weight]:21±1g [Introduction]:TX433-JKD-20 is a 433MHz bendable rubber antenna....

Ebyte TX2400-JK-11 high gain antenna 3dBi 2.4GHz SMA-J rf radio Omnidirectional Antenna

$1.39

[Frequency]:2.4G [Interface]:SMA-J [Resistance]:50Ω [Gain]:3dBi [Standing wave (SWR)]:≤1.5 [Introduction]:Rubber antenna

EBYTE OEM ODM TX433-FPC-3208 433mhz FPC internal antenna high gain omni antenna fpc manufacturer antenna

$0.55

wireless module antenna iot solutions 433mhz FPC internal antenna high gain omni antenna soft flexibility aerial [Gain]:2.0dBi [Interface]:IPX [Standing wave (SWR)]:≤1.5 [Frequency]:423~443MHz [Resistance]:50Ω [Feature]:vertical high gain antenna [Weight]:1±0.1g [Introduction]:TX433-FPC-3208 is...

EBYTE TX868-JZLW-15 868MHz Antenna 3dBi Rubber Rod IPEX-1 High Gain for Equipment Cabinet Logistic Fleet Property Security

$1.55

[Product weight]:20g [Gain]:3.0dBi [Interface]:IPEX-1 [Standing wave (SWR)]:≤1.5 [Frequency]:868MHz [Resistance]:50Ω [Introduction]:TX868-JZLW-15 is a rubber antenna with 868Mhz frequency band, antenna size is about 165mm, IPEX-1 generation interface, suitable for 868Mhz frequency...

Ebyte TX2400-PCB-4811 2.4G/5.8G Wifi Antenna PCB Antenna Series SMA-J 5dBi Small Size Rubber Antenna For Wireless Module For Ruter

$0.33 – $0.43

Ebyte TX2400-PCB-4811 high gain lte 4g omni wifi network antenna 2.4GHz PCB flexible internal antenna for wireless&IOT device [Gain]: 3.0dBi [Interface]: IPEX [Standing wave (SWR)]: ≤1.5 [Frequency]: 2.4GHz [Resistance]: 50Ω [Feature]:vertical high gain antenna [Introduction]:Ebyte's...

Ebyte TX433-FPC-5711 433MHz FPC Wifi Antenna High Gain 2.5dBi Omni Directional Aerial

$0.57

Ebyte TX433-FPC-5711 2.5dBi 433mhz Flexible Antenna Wireless Module Patch Antenna Internal Aerial FPC Antenna with IPX Connector [Frequency]:433MHz [Interface]:IPX 1 Interface [Resistance]:50Ω [Gain]:2.5dBi [Standing wave (SWR)]:≤1.5 [Weight]:1±0.1g [Introduction]:2.5dBi 433mhz Flexible...

433MHz SMA-J Interface 50 Ohm Impedance Less Than 1.5 SWR 2.5dBi Gain High-quality Omnidirectional Antenna TX433-JZG-6

$1.08

2.5dBi RF Omni directional Straight Antenna for wireless communication and others [Gain]:2.5dBi [Interface]:SMA-J [Standing wave (SWR)]: ≤1.5 [Frequency]:433MHz [Resistance]:50Ω [Feature]:Straight Antenna [Introduction]:Ebyte's Antenna has the industry’s broadest selection of antennas for...

FREE SHIPPING

Free shipping on orders over $89.99.

SUPPORT 24/7

Contact on weekdays: ebyteiot@cdebyte.com.

30 DAYS RETURN

Simply return it within 30 days for an exchange.

100% PAYMENT SECURE

We ensure secure payment.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Aggiungi alla lista dei desideriSfoglia la lista dei desideriRimuovi la lista dei desideri
Shopping cart

Your cart is empty.

Return To Shop

Add Order NoteEdit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

10%OFF Code: ebyteiot ,Available for any order ,Coupon code will work on checkout page