- $0.1 Sample Module
- 2.4GHz Module
- 4G/NB-IoT module
- Antenas 3.0
- Antenna(2.4G)
- Antenna(433Mhz)
- Antenna(5.8Ghz)
- Antenna(868/915Mhz)
- Assist development and Test Board
- Best Selling Products
- Ble Module
- Communication Converter
- Core Board SBC Series
- DTU/RTU
- ESP32 WROOM 32 Board Price
- Fiberglass Antenna
- GNSS/GPS Positioning Module
- Lightweight Antenna
- LoRa Wireless Module
- LoRa wirelss modem
- LoRaWAN®
- Modbus gateway
- New product promotion (up to 20% off)
- New products
- other
- Power Module
- Radar Modules
- Remote I/O Modules
- RF Module
- Sensing and detection
- Serial port server/ Ethernet
- SoC module
- SPI Module
- StarFlash Module
- Superheterodyne Module
- Top 10 Modem & DTU Devices
- Top 10 Wireless Modules
- UART Module
- Ultra-Wideband (UWB)
- Wi-SUN Module
- WiFi Module
- Wireless audio
- Wireless digital transmission station DTU
- Wireless modem
- Wireless Module
- ZigBee Module
Lightweight Antenna
Engineered for space-constrained smart devices, our lightweight antenna series delivers exceptional RF performance within an ultra-compact form factor, enabling seamless connectivity for your IoT modules.
1. Lightweight IoT Antenna Series - Sub-Product Line Filter
Use the following table to understand our naming conventions and filter the core sub-series based on your physical design constraints.
| Sub-Series Code | Antenna Type | Form Factor & Material | Installation / Interface | Best Application Scenarios |
|---|---|---|---|---|
| FPC | Flexible Printed Circuit | Ultra-thin, bendable, lightweight tape | IPEX-1 / IPEX-3 / IPX | Internal mounting on curved surfaces, compact smart home devices. |
| PCB | Printed Circuit Board | Rigid board, compact size | IPEX / SMA-J | Internal flat mounting, routers, gateways requiring stable structural gain. |
| TH | Spring Antenna | Coiled copper spring, highly compact | PCB Solder (Through-hole) | Ultra-low cost, directly soldered to module boards (e.g., smart hotel locks). |
| JK / JKD | Rubber / Foldable Antenna | TPEE material, straight or 90-degree foldable | SMA-J (Male thread, inner pin) | External cabinet mounting, modems, adaptable signal orientation. |
| JZ / JZG | Glue Stick / Rubber Rod | Straight, sturdy cylinder shape | SMA-J | Standard external communication modules, durable outdoor/industrial use. |
| JW | Elbow Rubber Antenna | Fixed 90-degree right angle | SMA-J | Wall-mounted terminals where straight antennas take up too much vertical space. |
| JZLW | Screw Fixed Rubber Rod | High gain, screw-fixed base | IPEX-1 to external rod | Equipment cabinets, logistic fleets, property security bases. |
2. Model Selection by Parameters (Frequency & Form Factor)
Select your specific product model by matching the operating frequency of your Ebyte IoT module with the required antenna form factor.
| Frequency Band | Recommended FPC/PCB (Internal) | Recommended Rubber (External) | Recommended Spring (Solder) |
|---|---|---|---|
| 170MHz / 230MHz (VHF) | - | TX170-JKD-20, TX230-JK-11 | - |
| 433MHz (UHF, LoRa) | TX433-FPC-5711, TX433-PCB-3207 | TX433-JZ-5, TX433-JKD-20, TX433-JW-5 | TX433-TH-3, SW433-TH32DN |
| 868MHz / 915MHz (LoRaWAN) | TX915-FPC-4510 | TX868-JZ-5, TX915-JK-11, TX868-JZLW-15 | - |
| 2.4GHz / 5.8GHz (Wi-Fi, BLE, Zigbee) | TX2400-FPC-2509, TX2400-PCB-4811 | TX2400-JKD-20, TX2400-JZ-3, TX2400-JW-3 | - |
| LTE / GSM / NB-IoT (Cellular) | TX4G-FPC-4015, TX4G-PCB-125014 | TXGN-JKD-20, TXGN-JW-5 | - |
3. Quick Selection Guide
- Step 1: Match the Frequency. The antenna's frequency (e.g., 433MHz) must strictly match your Ebyte wireless module (e.g., E220-400T22S). Mismatched frequencies will result in high SWR and drastically reduced range.
- Step 2: Evaluate Spatial Constraints. For ultra-compact, enclosed devices (like smart wearables or internal sensors), choose FPC (-FPC-) or Spring (-TH-) antennas. For gateways or routers with external housing, choose Rubber (-JK-/-JZ-) antennas.
- Step 3: Confirm the Interface. Ensure the antenna interface matches your module or board. Use IPEX (IPX) for internal RF connectors, PCB Solder for direct integration, and SMA-J for external screw-on connections.
- Step 4: Check Gain Requirements. Higher dBi (e.g., 5dBi) offers longer range but a flatter, more directional signal. Lower dBi (e.g., 2dBi) offers a wider, more uniform omnidirectional coverage pattern.
4. Frequently Asked Questions (FAQ)
Q1: How do I choose between an FPC and a PCB antenna for my Ebyte LoRa module?
A: Both are internal antennas, but FPC (Flexible Printed Circuit) is bendable and comes with adhesive backing, making it perfect for curved housings. PCB (Printed Circuit Board) antennas are rigid and offer slightly better structural stability for the signal pattern. If space is tightly confined and non-flat, choose FPC.
Q2: What is the benefit of a spring antenna (TH series) for modules like the E07 or E220 series?
A: Spring antennas like the TX433-TH-3 are incredibly cost-effective and space-saving. They solder directly onto the main PCB board alongside your E07 or E220 module, eliminating the need for IPEX cables or SMA connectors. They are ideal for high-volume, low-cost smart devices like smart hotel locks or remote controls.
Q3: Can I use a 2.4GHz Wi-Fi antenna for a 2.4GHz ZigBee or BLE module?
A: Yes. The 2.4GHz frequency band is shared among Wi-Fi, Bluetooth (BLE), and ZigBee. Any antenna in our 2.4GHz series (such as TX2400-JKD-20 or TX2400-FPC-2509) will work perfectly with Ebyte's BLE or ZigBee modules, provided the interface matches.
Q4: My Ebyte module has an IPEX connector, but I need the antenna outside the metal cabinet. What should I do?
A: You cannot place an FPC/PCB antenna inside a sealed metal cabinet, as the metal blocks RF signals. You should purchase an IPEX-to-SMA adapter cable. Connect the IPEX end to your module, mount the SMA female end to a hole drilled in your cabinet, and screw on a Rubber Antenna (e.g., the -JK- or -JZ- series) on the outside.
Ebyte 2.4GHz UHF VHF 2.4GHz RF Omnidirectional antenas wifi 3.0 precios TX2400-JKD-20
$1.42TX2400-JKD-20 is a 2.4GHz bendable rubber antenna. and the antenas wifi 3.0 precios 1.07$. Height of the antenna is 200mm. With a SMA-J connector (SMA inner screw thread and inner...
Ebyte TX2400-JK-11 high gain antenna 3dBi 2.4GHz SMA-J rf radio Omnidirectional Antenna
$1.39[Frequency]：2.4G [Interface]：SMA-J [Resistance]：50Ω [Gain]：3dBi [Standing wave (SWR)]：≤1.5 [Introduction]：Rubber antenna
Ebyte TX2400-PCB-4811 2.4G/5.8G Wifi Antenna PCB Antenna Series SMA-J 5dBi Small Size Rubber Antenna For Wireless Module For Ruter
$0.33 – $0.43Ebyte TX2400-PCB-4811 high gain lte 4g omni wifi network antenna 2.4GHz PCB flexible internal antenna for wireless&IOT device [Gain]： 3.0dBi [Interface]： IPEX [Standing wave (SWR)]： ≤1.5 [Frequency]： 2.4GHz [Resistance]： 50Ω [Feature]：vertical high gain antenna [Introduction]：Ebyte's...
EBYTE TXWF-FPC3-3710 2.4GHz 5.8 GHz FPC Build-in Antenna IPEX-3 Interface FPC Antenna Series Small Size Light Weight
$0.39 – $0.43TXWF-FPC3-3710 FPC built-in antenna 2.4/5.8GHz dual-band FPC built-in antenna IPEX-3rd Generation Interface [Type]：FPC built-in antenna [Frequency band]：2.4/5.8GHz [Interface]：IPEX-3 [Impedance]：50Ω [Gain]：2.5dBi [VSWR]： ≤2.0 [weight]： 1g [Introduction]：TXWF-FPC3-3710 is a 2.4/5.8GHz dual-band FPC built-in antenna...
2.4G Antenna 3dBi Rubber Rod IPEX-1 High Gain for Equipment Cabinet Logistic Fleet Property Security Taxi Fleet TX2400-JZLW-15
$1.992.4GHz Rubber Antenna IPEX-1 Connector 5dBi Gain [Gain]： 5dBi [Interface]：IPEX-1 [Standing wave (SWR)]：≤1.5 [Frequency]：2.4~2.5GHz [Resistance]：50Ω [Product weight]：20g [Introduction]：TX2400-JZLW-15 is a rubber antenna with 2.4Ghz frequency band, antenna size is about 165mm,...
EBYTE TXWF-PCB-4212 lot 2.4GHz 5.8GHz PCB Built-in Antenna 2dBi 50Ω 2W IPX-1 Interface
$0.69Ebyte TXWF-PCB-4212 OEM/ODM Antena incorporada 2.4/5.8GHz 2.5 dbi Dual frequency Wireless Equipment Dual band PCB Built-in Antenna [Frequency]：2.4/5.8GHz [Interface]：IPX 1st generation [Resistance]：50Ω [Gain]：2dBi [Standing wave (SWR)]：≤1.5 [Introduction]：PCB built-in antenna [Weight]：1g...
2.4G 5.8G EBYTE Antenna Rubber Antenna SMA-J Interface 2dBi For Wireless TX2400-JW-3
$0.88 – $0.99TX2400-JW-3 Rubber Antenna 2.4GHz 2dBi SMA-J Omnidirectional Radiation Vertical Polarization 20W External Wireless Module [Frequency]：2.4-2.5GHz [Interface]：SMA-J [Resistance]：50Ω [Gain]：3.5dBi [Standing wave (SWR)]：≤1.5 [Feature]：Rubber antenna [Introduction]：Rubber antenna TX2400-JZ-5 vertical high gain antenna...
EBYTE TX2400-FPC-2509 2.4G 5.8G FPC Antenna IPX 2dBi Small Size For Wireless Module Smart Industry 2.4G FPC Antenna Series
[Frequency]：2.4G [Interface]：IPEX [Resistance]：50Ω [Gain]：2dBi [Standing wave (SWR)]：≤2.0 [Introduction]：Ebyte's Antenna has the industry’s broadest selection of antennas for a wide variety of applications. They work well for common applications that need...
Ebyte TXWF-PCB-3214 2.4GHz 5.8GHz WIFI Antenna Red Built-in Small Volume FPC Linear Polarization Omnidirectional Radiation 2W
$0.66Ebyte OEM/ODM Antena incorporada 2.4/5.8GHz Dual-band WIFI PCB IPEX interface Flexible antenna for wireless modules [Frequency]：2.4/5.8GHz [Interface]：IPX 1st generation [Resistance]：50Ω [Gain]：2dBi [Standing wave (SWR)]：≤1.5 [Feature]： FPC built-in antenna [Weight]：1g [Introduction]：TXWF-FPC-3214 is...
Ebyte TXWF-PCB-3810 2.4GHz 5.8GHz PCB Built-in Antenna 2dBi 50 2W IPEX-1 Interface
$0.33Ebyte OEM/ODM Antena incorporada 2.4/5.8GHz 2dBi Dual band PCB Flexible High gain 433m built-in antenna With IPX 1 interface [Frequency]：2.4/5.8GHz [Interface]：IPX 1st generation [Resistance]：50Ω [Gain]：2dBi [Standing wave (SWR)]：≤1.5 [Feature]：FPC built-in...
FREE SHIPPING
Free shipping on orders over $89.99.
SUPPORT 24/7
Contact on weekdays: ebyteiot@cdebyte.com.
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment.