E810-DTU(4RS1E) four serial port server of RS422 & RS485 & RS232 to Ethernet
[Network protocols]:IP, TCP/UDP, ARP, IPV4
[Working voltage]:DC 8~28V
[Product size]:172*107*29mm
[Interface]:Ethernet
[Transmission]:RS485 RS232 RS422
[Weight]:416±5g
[Introduction]:E810 (4RS1E) is a four serial port server of RS422 & RS485 & RS232 to Ethernet, which realizes transparent data transmission between RJ45 network port and RS422, RS485, RS232. The device is equipped with M3 series 32-bit processor, which runs fast and has high efficiency, with adaptive network rate. TCP Server, TCP Client, UDP Server, UDP Client four communication mechanisms.
| No. | Specification and characteristic | Description | 
| 1 | Supply voltage | 8 ~ 28V DC, note: higher than 28V will cause permanent damage to the device, 12V or 24V power supply is recommended | 
| 2 | Working current | 180.7mA@12V(RS232) ,176.8mA@12V(RS485) ,173.8mA@12V(RS422) | 
| 3 | Operating mode | Asynchronous half-duplex or asynchronous full-duplex | 
| 4 | Interface mode | RS232:Network port type connector,The line sequence is introduced as follows RS485/RS422:1*5*3.81,Crimping method RJ45:Network port | 
| 5 | Transmission medium | Network cable / twisted pair or shielded wire | 
| 6 | Serial port standard | RS232:1200~115200bps RS485/RS422:1200~460800 bps | 
| 7 | Network port specification | RJ45,10/100Mbps | 
| 8 | Network protocol | IP、 TCP/UDP、 ARP、 ICMP、 IPV4 | 
| 9 | IP access method | Static IP、 DHCP | 
| 10 | DNS | Support | 
| 11 | User configuration | Web page configuration | 
| 12 | Simple transparent transmission method | TCP Server 、TCP Client 、 UDP Server 、 UDP Client | 
| 13 | TCP Server connection | Supports up to 4 TCP connections | 
| 14 | Operating temperature | -40 ~ +85℃,Industrial grade | 
| 15 | Operating humidity | 10% ~ 90%,Relative humidity, non-condensing | 
| 16 | Storage temperature | -40 ~ +125℃,Industrial grade | 
| 17 | Average weight | 416g±5g | 
| 18 | Size | 150*107*29mm | 








 
     
     
     
     
     
     
    