Productos

The Ebyte RD400D is a 410-470MHz TI CC1200 UART digital radio module featuring 30dBm transmit power, 5.6km communication distance, GMSK/4FSK modulation, and native protocol support for TRIMTALK, TRIMMARK3, and TRANSEOT....

The Ebyte RD400D-TB is a digital transmission radio evaluation test kit for the RD400D module, featuring CH340X USB-to-UART, WS3232 RS232 converters, full IO pinouts, and 5V-24V DC input for rapid...

XC-IPX-SMA-15 IPEX to SMA adapter cable [Interface]：IPEX-1 to SMA-K [Weight]： 3g [Tooth length]：1.1cm [Line length]：15cm [Wire]：RF1.13 [Introduction]：XC-IPX-SMA-15 is an IPEX-1 generation to SMA-K (SAM external thread internal hole) conversion cable. The...

E62-DTU(433D20) Ebyte RS232 RS485 3km full duplex automatic frequency hopping wireless module [Frequency]：425~450.5MHz [Power]：20dBm [Distance]：1.0km [Interface]：RS232/RS485 [Weight]：128±5g [Introduction]：E62-DTU-433D20 with point-to-point transmission, operates at 425~450MHz. features FHSS(Frequency-Hopping Spread Spectrum) and TDD(Time...

The Ebyte RSM232MT5V is a single-channel full-duplex high-speed RS232 isolation transceiver module, which integrates a high-reliability isolation power supply and a high-strength signal isolation chip, as well as a standard RS232...

The Ebyte RSM485MT5V is a high-speed, single-channel half-duplex RS485 isolation transceiver module featuring integrated signal and power isolation, operating with a 4.75V to 5.25V input, 5.2V to 5.4V output, and...

Ebyte SW433-TH32DN — 433MHz Helical Spring Antenna, 50Ω, 1dBi, Through-Hole Model: SW433-TH32DN Frequency: 433 MHz (ISM band, 420–450 MHz) Impedance: 50 Ω Gain: 1 dBi (omnidirectional) Connector / Mount: Through-hole...

The Ebyte E07-900MBL-01 is a professional USB development evaluation kit designed for the CC1101-based E07-900M10S wireless module, featuring full pin-out headers and a plug-and-play interface for rapid Sub-1GHz RF prototyping....

Ebyte E30 eries module test board SI4438/4463 Development Evaluation Kit USB interface pre welding interface [Interface]：USB [Size]：53*27mm [Introduction]：E30-400M20S is a hardware module (SPI) based on the SI4463 RF chip imported...

Analog signal conversion module [Input voltage]：4.5~12V [Output voltage]：24V [Output current]：50mA [Output power]：1.2W [Product size]：25.4*25.4*8mm [Product weight]：7.5g [Introduction]：TF22-AAC24V is an active module with pre-stage voltage/PWM signal input and post-stage voltage/current signal...