Zigbee wireless module have low power consumption, low data rate, Long range, high reliability, high security and low cost. Adopt Zigbee mesh network topology. It is a standardized wireless transceiver&receiver module. It has wide application prospects in lighting, door locks, medical treatment, etc.
E18-MS1-PCB Ebyte ZigBee RF Module CC2530 Smart home Antomation Network OEM E18-MS1-PCB IOT Solution [IC]:CC2530 [Frequency]:2.4~2.48GHz [Power]:4dBm [Distance]:0.2km [Interface]:UART/IO [Weight]:1.2±0.1g [Introduction]:E18-MS1-PCB is based on original imported RF chip CC2530 form...
E180-Z6907A is a small-sized, low power consumption, high reliability, ZIGBEE module operating in the 2.4GHz frequency band based on TELINK TLSR8269 wireless SOC, which is designed and produced by Chengdu...
E18-2G4Z27SI TI CC2530F256+PA CC2592 wireless module 2.4GHz ZigBee development board smart home [IC]:CC2530 [Frequency]:2.40~2.48GHz [Power]:27dBm [Distance]:2.5km [Interface]:IO [Weight]:1.5±0.1g [Introduction]:E18-2G4Z27SI is a small-sized 2.4GHz SMD wireless modulo Zigbee, which is designed...
A small, low-power, high-reliability, 2.4GHz ZIGBEE module based on Silicon Labs EFR32MG1B,which are designed and produced by Chengdu Ebyte. The chip comes with high-performance 32-bit ARM Cortex. -M4 core, integrated...
E18-MS1PA2-IPX long range wireless rf module smd IPEX interface TI cc2530 zigbee module for smart home [IC]:CC2530 [Frequency]:2.4~2.48GHz [Power]:20dBm [Distance]:1.2km [Size]:16*22.5mm [Weight]:1.5±0.1g [Introduction]:E18-MS1PA2-IPX is small-sized 2.4GHz ZigBee wireless module, which...
E72-2G4M05S1A is small SMD wireless RF module designed by Chengdu Ebyte, working at 2.402~2.480GHz, with 5dB maximum power and PCB antenna & IPEX interface. It has super low RF &...
E75-2G4M10S designed by Chengdu Ebyte is a high-performance and low-consumption ZigBee wireless transceiver module, which is based on NXP JN5169. It provides a complete application integration scheme at ISM(2.4-2.5GHz) based...
E18-2G4U04B Zigbee CC2531 2.4Ghz USB zigbee usb RF Transmitter and Receiver PCB Antenna 8051 MCU ISM Band LED Indicator [IC]:CC2531 [Frequency]:2.394~2.507GHz [Protocol]:Zigbee [Distance]:200m [Interface]:USB [Product weight]:8.7±0.1g [Introduction]:E18-2G4U04B uses CC2531 RF...
The EBYTE E18-MS1-IPX is a Zigbee Wireless Smart Home Automation Module with built-in 2.4GHz CC2530 RF chip and integrated 8051 microcontroller from Texas Instruments, designed for Zigbee Mesh Network and...
E18-2G4Z27SP is a small size 2.4GHz ZigBee wireless module designed and produced by Ebyte, SMD, PCB on-board antenna, transmission power 500mW, pin spacing 1.27mm,suitable for a variety of application scenarios...
The EFR32 ZigBee 3.0 Wireless Module allows for secure and reliable communication up to 500 meters. This cost-effective module operates at 2.4GHz and is equipped with high-performance 32-bit ARM Cortex-M4...