ECM31-B08 Allwinner T113-S Industrial PC
Dual-Core 1.2GHz | Ubuntu + Node-RED Pre-installed | RS485 / CAN / DI / DO | WiFi & Bluetooth | DIN Rail Mount
The ECM31-B08 is an industrial-grade programmable controller built on the Allwinner T113-S dual-core Cortex-A7 SoC. It integrates Ethernet, dual RS485, dual CAN, digital I/O, and built-in WiFi/Bluetooth — running Ubuntu Linux with Node-RED pre-installed for zero-code visual logic deployment. Designed for IIoT edge control, it cuts development time and lowers integration costs in factory automation, energy management, and smart building applications.
Compact Industrial Design — DIN Rail & Panel Mount Ready
T113-S Dual-Core 1.2GHz
Cortex-A7 SoC with 256MB DDR3 for real-time edge data processing.
Node-RED Visual Logic
Drag-and-drop flow programming — no coding required for most IIoT tasks.
Triple-Proof Coating
Conformal spray coat — anti-mold, moisture-proof, salt-spray resistant.
WiFi + Bluetooth Built-in
Dual wireless for local IoT networks and mobile commissioning.
Technical Specifications
| Processor | Allwinner T113-S, Dual-core Cortex-A7 @ 1.2GHz |
|---|---|
| RAM / Storage | 256MB DDR3 RAM; eMMC / TF card expandable |
| Operating System | Ubuntu Linux + Node-RED (pre-installed) |
| Wired Interfaces | 1× Ethernet, 2× RS485, 2× CAN, 4× DI, 4× DO |
| Wireless (B08) | WiFi 2.4GHz (802.11 b/g/n) + Bluetooth 4.2 |
| Power Supply | DC 9–36V wide-range input |
| Operating Temp | -40℃ to +85℃ (industrial grade) |
| Dimensions | 83 × 55 × 30 mm; DIN rail / panel mount |
| Protection | Triple-proof conformal coating (anti-mold, moisture, salt spray) |
| Certifications | CE, RoHS compliant |
| Data Updated | April 2026 |
Interface & Pin Definition
Rich Industrial I/O — Ready for Multi-Protocol Integration
Dual RS485 and dual CAN buses enable simultaneous multi-device polling. Isolated DI/DO channels support PLC-level signal conditioning for sensors, relays, and actuators.
Ideal Applications
Remote I/O, PLC gateway, sensor telemetry, converter control
Solar inverter monitoring, battery BMS, grid edge control
HVAC control, access management, lighting automation
Soil sensors, irrigation control, greenhouse monitoring
Asset telemetry, fleet data aggregation, container status
Developer Resources
Full technical documentation, SDK, and case studies for ECM31-B08 integration.
📄 Download Technical Manual 💻 Software & SDK / Case StudiesFrequently Asked Questions
Q: What is the difference between ECM31-B08 and B09?
A: The B08 includes WiFi 2.4GHz + Bluetooth 4.2 for short-range wireless LAN and mobile commissioning. The B09 replaces this with a 4G LTE cellular module for wide-area remote connectivity — ideal when no local network infrastructure is available.
Q: Can I run Node-RED on the ECM31-B08 out of the box?
A: Yes. Node-RED comes pre-installed on Ubuntu. Connect via browser on the same network, open the Node-RED editor, and start building data flows immediately — no additional software installation required.
Q: What industrial protocols does the ECM31-B08 support?
A: The device supports Modbus RTU/TCP (via RS485/Ethernet), CAN 2.0A/B, and standard TCP/IP. MQTT and HTTP are supported at the application layer through Node-RED nodes, enabling direct cloud integration with AWS IoT, Azure IoT Hub, and similar platforms.
Q: Is the ECM31-B08 suitable for outdoor or harsh environments?
A: Yes. The PCB is triple-proof conformal coated (anti-mold, moisture-proof, salt-spray resistant) and the device operates across -40℃ to +85℃. It is designed for industrial enclosures, DIN rail mounting in control cabinets, and similar demanding deployments.
Q: What power supply does the ECM31-B08 require?
A: The ECM31-B08 accepts a wide-range DC input of 9–36V, compatible with standard 12V and 24V industrial power rails. No additional power converter is needed in most panel installations.
