Products

TX433-JKD-20P 433MHz LoRa antenna 4dBi high gain omni wireless device module antenna for communication [Antenna type]：Rubber antenna [Frequency]：433M [Interface]：SMA-J [Resistance]：50Ω [Gain]：4.0dBi [Standing wave (SWR)]：≤1.5 [Weight]：21±1g [Introduction]：LoRa antenna

NS1 serial data ⇌ Ethernet data conversion Serial to Ethernet Module [Protocol]：IPv4、TCP/UDP、HTTP、MQTT [Interface]：TTL(3.3V)、Ethernet port (RJ45) [Size]：17 x 19 x 4mm（length x width x height） [Weight]：1.6g ± 1g [Introduction]：NS1 is a...

K61-DL20 Switching Value Synchronous Remote Transmission   [DI input channels]：4 [DO output channels]：4 [Interface type]：Switch digital type [Size]：110*84.32*25.3mm [Product weight]：164±5g [Introduction]：This product is a cross-communication function product. Function: The sender...

EBYTE LoRa E220-900T22D adopts a new generation of LoRa spread spectrum technology and a wireless serial port module (UART) designed based on the LLCC68 chip solution. Works in the (850.125~930.125MHz) frequency...

[Communication interface]：RJ45, RS485 [Working voltage]： DC 9～36V [Product weight]：180±5g [Introduction]：M31 series distributed IO host supports Modbus TCP protocol and Modbus RTU protocol for acquisition control. The device supports simultaneous access by...

M31-AXAX8080G,8DI,8DO,M31 Distributed IO host Support Modbus TCP protocol and Modbus RTU protocol [Communication interface]：RJ45, RS485 [Working voltage]： DC 9～36V [Product weight]：180±5g [Introduction]：M31 series distributed IO host supports Modbus TCP protocol and...

[Communication interface]：RJ45, RS485 [Working voltage]： DC 9～36V [Product weight]：180±5g [Introduction]：The M31 series distributed IO host supports Modbus TCP protocol and Modbus RTU protocol for acquisition control. The device supports simultaneous access...

Ebyte MA01-XACX0440 RS485 Industrial Level Serial port I/O networking module   [Specifications]：4AI+4DO [Interface]：RS485 [Installation method]：positioning hole [Size]：115*90*40mm [Product weight]：160±5g [Introduction]：MA01-XACX0440 is a support for the acquisition of four sensor analog...

ME31-AAAX2240 Ethernet I/O networking acquisition control module [Specifications]：2DI+2AI+4DO [DI channels]：2-way [AI channels]：2-way [DO channels]：4-way [Installation method]：DIN-Rail Mounting [Size]：121*72*34mm [Product weight]：150 ±5 g [Introduction]：ME31-AAAX2240 is equipped with 4 Type A relay...

[Introduction]：ME31-AAAX4220 is a network I/O networking module with 2-way A-type relay output, 2-way analog (0-20mA/4-20mA) input, 4-way dry contact input detection, supports ModbusTCP protocol or ModbusRTU protocol for acquisition and...

[Introduction]：ME31-AXXX8000 is a network I/O networking module with 8-way dry contact input detection, supports Modbus TCP protocol or Modbus RTU protocol for acquisition control, and the device can also be...

ME31-XAXX0600 is a network I/O  networking module with 6 analog (0-20mA/4-20mA) inputs, supports Modbus TCP protocol or Modbus RTU protocol for acquisition and control, and the device can also be...