[IC]:SX1278
[Frequency]:410~525MHz
[Power]:20dBm
[Distance]:5km
[Interface]:UART
[Weight]:5.5g
| Main parameters | performance | Remark | |
| minimum value | maximum value | ||
| Power supply voltage(V) | 0 | 5.2 | Exceeding 5.2V may permanently burn the module |
| Blocking power (dBm) | - | -10 | Do not communicate at close range with high-power radio frequency |
| Working temperature (℃) | -40 | 85 | Industrial grade |
| Main parameters | performance | Remark | |||
| minimum value | Typical value | maximum value | |||
| Working voltage v | 3.3 | 5 | 5.2 | ≥3.3V can guarantee the output power. The lower the voltage, the greater the supply current. | |
| Communication level(V) | - | 3.3 | - | Using 5V TTL risks burning out | |
| Working temperature (℃) | -40 | - | 85 | Industrial grade design | |
| Working frequency band (MHz) | 410 | - | 525 | Support ISM band | |
| achievement | Emission current (mA) | - | 106 | - | Instantaneous power consumption |
| consume | Receive current(mA) | - | 15 | - | - |
| Sleep current (uA) | - | 4 | - | Software shutdown | |
| Maximum transmit power (dBm) | 19 | 19.5 | 20 | - | |
| Receiving sensitivity (dBm) | -144 | -146 | -147 | - | |
| Air rate (bps) | - | - | -- | User Programmed Control | |
| Main parameters | describe | Remark |
| reference distance | 5000m | In a clear and open environment, the antenna gain is 5dBi, the antenna height is 2.5 meters, and the air rate is 2.4kbps. |
| Subcontracting method | 197 Bty | The maximum capacity of a single package, which will be automatically subdivided if exceeded. |
| cache capacity | 512 Bty | - |
| Modulation method | LoRa™ | - |
| Communication interface | UART serial port | TTL level |
| Packaging method | SMD type | - |
| Interface mode | 1.27mm | - |
| Overall dimensions | 16 * 26mm | - |
| Antenna interface | IPEX/stamp hole | Characteristic impedance is about 50 ohms |










